cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
151
Views
0
Helpful
2
Replies
Beginner

911 Calling

I have attached a screenshot of Cisco RTMT that shows the calls.  We receive calls that are labelled as "911", however, there is no answer.  More than likely it's a spoofed call, however, has anyone else run into this and if so, how did you remedy the situation?

2 REPLIES 2
Beginner

Re: 911 Calling

We had a similar issue however it was not spoofed calling.  It ended up being a bad FXO line that was randomly going off hook and hitting the 911 dial peer which the dial peer label 911 was inserted into the calling number.  The RTMT log was filled with the calling number coming from one of our gateways.

 

Highlighted
VIP Collaborator

Re: 911 Calling

The first thing I'd do is figure out for sure if the calls are coming in from the outside, or as @shleets proposed, if it is being accidentally generated inside your infrastructure.

Take a look at the CUCM trace files to see where the calls is coming from and/or the logs on your PSTN gateway.

Maren

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards