AAR Acting on Wrong Calls

[refram]

Here's one. 

I had AAR working and now it's not.  I cannot figure out what changes have been made that could have done it.  But what's happening now is when I test it by setting the location bandwidth to 1 calls from one site to another go through as if there's all the bandwidth in the world.  But if we make a call to the phone company THEN we get a "Not enough bandwidth" statement and a busy signal.

[Chris Deren]

1 does not indicate all the bandwidth in the world, you need to check the "unlimited" checkbox to do that. 1 means 1 kbps which invokes CAC, and if AAR is configured properly it should be invoked.

Things to check:

• AAR group on calling and called phone, DN
• AAR CSS on calling phone
• External phone number mask or AAR destination on called DN

HTH,

Chris

[Jaime Valencia]

Have you tried hitting the Resync BW option??

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk