Add Fax Device in CME

[John Shen]

Hi,

I am trying to add Fax in CME. I have added the following configuration, and I cannot add ephone assignment it kept asking for Mac address, and calling the number it always give busy signal...

stcapp ccm-group 1

stcapp

!

stcapp supplementary-services

port 2/0/1

  fallback-dn 398

voice translation-rule 5846

rule 1 /5846/ /398/

voice translation-profile DID5846

translate called 5846

voice-port 2/0/1

description FAX-MACHINE-5846

station-id number 398

caller-id enable

dial-peer voice 2 pots

destination-pattern 398

port 2/0/1

!

dial-peer voice 5846 pots

destination-pattern 5846

port 2/0/1

!

dial-peer voice 398 pots

translation-profile incoming DID5846

incoming called-number 5846

direct-inward-dial

port 0/0/0:23

ephone-dn  59

number 398

description FAX 5846

name FAX 5846

ephone  45

Thanks!

John

[acampbell]

John,

I have got this working in my setup.

Your config is nearly there.

Can you confirm that you already have SCCP started and what is the SCCP CCM-GROUP number.

Even if you could post the full show run I may be able to help.

Regards

Alex