Additional Language load for CUCM 6.1.5

[david.keedy]

Hello,

I have a CUCM 6.1.5 cluster, and a phone install is impending in another country, but their language for the phones is not loaded.  I have tried to find a good procedure to load the additional languages, but cannot find it.  Can anyone point me to the needed information to complete this?

[Jaime Valencia]

Everything is installed via the SW upgrade option in OS admin

Software Upgrades

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/6_1_1/cucos/iptpch7.html

You can use the Software Upgrades options to perform the following types  of installations and upgrades:

•Install/Upgrade—Use this option to  upgrade the application software, install Cisco Unified Communications  Manager Locale Installers and dial plans, and upload and install device  packs, phone firmware loads, and other COP files.

•TFTP File Management—Use this option to  upload various device files for use by the phones to the TFTP server.  The TFTP server files that you can upload include custom phone rings,  callback tones, and phone backgrounds.

Same process for any CUCM Linux appliance you might have.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk