09-19-2011 06:19 PM - edited 03-16-2019 07:05 AM
Hello all
We have a CUCM 7.1(5) and an Avaya G3, the Avaya is going to be replaced soon and all of its stations will be migrated over to the CUCM, we are trying to detemine what to use for all of the analog lines (93 to be exact). We considered the VG248 but its EOL already, that leaves us with VG224s and a 112-FXS.
I'm familiar with the VG2XX devices but the 112-FXS, for what I have read in this forum, is somewhat of a mistery.
Does anyone have any advice on the subject?
Any advice will be greatly appreciated.
Solved! Go to Solution.
09-20-2011 03:37 AM
Hi,
Looks like this is a copy of a 3900 router full of FXS ports
2 power suplies etc etc
HTH
Alex
09-20-2011 03:37 AM
Hi,
Looks like this is a copy of a 3900 router full of FXS ports
2 power suplies etc etc
HTH
Alex
09-20-2011 07:37 PM
True, I have decided to opt for the VG224s.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: