Analog phones with CUCM

[Tim Nomani]

Hello all,

Looking to migrate many analog phones from a failed PBX using CUCM to register them.. There are more than an handful of phones in the hundreds.. Is the FXS module WS-X6624 that hold the most analog module are there any other MGCP hardware that can support a greater amount of analog phones per module ?

Thanks

[allan.thomas]

Hi Tim,

There are number analogue gateways, however the only significant comparision is the VG224, which also offers the port density that you are looking for.  It is specifically a 24-port 19" inch rack mountable chassis and not network line-card or module which has scalability issues.  Take a look at the following datasheet:-

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps2250/ps5516/product_data_sheet09186a00801d87f6.html

Regards

Allan.

Hope this helps, pls rate helpful posts.