Annunciator for SIP Phones

[a.shaik]

Hi all,

I configured all phones with SIP firmwares (7942 and 7965) with CUCM 7.1.3 release. It seems that annunicator is not working. I have tested with SCCP phone and it's working fine.

It seems that annunciator deal only with sccp. Is there any way to configure Annunciator in SIP.

Thanks

Shaik ASSANA

[Jaime Valencia]

Annunciator

An annunciator is a software function of the Cisco IP Voice Media  Streaming Application that provides the ability to stream spoken  messages or various call progress tones from the system to a user. It is  capable of   sending multiple one-way RTP streams to devices such as  Cisco IP phones or gateways, and it uses SCCP messages to establish the  RTP stream. The device must be capable of SCCP to utilize this feature.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/media.html#wp1046552

There is no way to modify the behavior.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[is_mail123]

hi ,

i have sip 6921 phones working with annunciator .

can u tell me how this is working

cucm 8.5

sip 9.1.1.1  firmware for phones

[paolo bevilacqua]

Why SIP, less features, more bugs.

As you just found.

[Karthik Sivaram]

Hello,

Annunciator support for sip phones is available from  callmanger version 8.0 :

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/ps10662/data_sheet_c78-584298.html

Hope that helps!

Regards,

Karthik Sivaram

[is_mail123]

thanks man