cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
699
Views
20
Helpful
5
Replies

Applying NTP reference to IP Phones

mahmoodmkl
Level 7
Level 7

Hi,

Please clarify whether applying the NTP reference to date/time group in turn this date/time group is assigned to device pool is it going to require the phones to be restarted..

Thanks           

5 Replies 5

Aman Soi
VIP Alumni
VIP Alumni

Hi Mahmood,

the phones would restart .

Adding a Date/Time Group

After adding a new date/time group to the database, you can assign it to a device pool to configure the date and time information for that device pool.

You must reset devices to apply any changes that you make.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/a02sycfg.html#wp1074727

the same would happen for NTP as well.

further, other nodes also need to be restarted in cluster for changes to happen.

https://supportforums.cisco.com/thread/2184534

regds,

aman

Hi,

Thanks for the reply.

Please confrim whether just adding the NTP reference without assigning to any date/time group will cause any reset of IP Phones.

Thanks

Hi Mahmood,

I do not think so but let me check.

regds,

aman

Hi.
As Aman stated(+5 P Aman) you don't need to reset anything if you just add a new ntp reference without assign it.

HTH
Regards

Carlo

Sent from Cisco Technical Support iPhone App

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo,

thanks for confirming.[+5]

regds,

aman