Please clarify whether applying the NTP reference to date/time group in turn this date/time group is assigned to device pool is it going to require the phones to be restarted..
the phones would restart .
Adding a Date/Time Group
After adding a new date/time group to the database, you can assign it to a device pool to configure the date and time information for that device pool.
You must reset devices to apply any changes that you make.
the same would happen for NTP as well.
further, other nodes also need to be restarted in cluster for changes to happen.
Thanks for the reply.
Please confrim whether just adding the NTP reference without assigning to any date/time group will cause any reset of IP Phones.
I do not think so but let me check.
Hi.As Aman stated(+5 P Aman) you don't need to reset anything if you just add a new ntp reference without assign it.HTHRegardsCarloSent from Cisco Technical Support iPhone App
thanks for confirming.[+5]
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: