08-30-2007 12:09 PM - edited 03-14-2019 11:18 PM
Does anybody knoww where I can get a compatability matrix for approved hardware when installing Cisco Unified Communications Manager 5.x and 6.0?
I have a feeling the server I have is too old.
Thank you
Solved! Go to Solution.
08-30-2007 12:17 PM
The following link has all the supported Servers for CM 4.x, 5.x and 6.x.
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure0900aecd8062a4f9.html
Only thing to keep in mind for the old servers listed is you need to have 2 GB RAM and 72 GB HDD as mentioned at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/rel_note/512cmrn.htm#wp39372
Hope this helps
08-30-2007 12:17 PM
The following link has all the supported Servers for CM 4.x, 5.x and 6.x.
http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure0900aecd8062a4f9.html
Only thing to keep in mind for the old servers listed is you need to have 2 GB RAM and 72 GB HDD as mentioned at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/rel_note/512cmrn.htm#wp39372
Hope this helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide