cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
614
Views
0
Helpful
4
Replies
Highlighted
Explorer

ATA-186 "SIP" won't take SCCP code via sata16us.exe

Got some 186's that someone upgraded to SIP 3.2.  I need them to SCCP cause my verison of CM won't work with SIP ATA's.

Have got  the latest and greatest SCCP code and the SATA186us.exe.  the sata816us server "sees" the ATA, reads the version of code on it and give me the commnd to enter via the handset to start the process.   I enter the 100# ip*ad*dr*ess*8000# via my analog handset and nothing happens.

yes i can Ping the ATA interface.

Suggestions?

Everyone's tags (3)
4 REPLIES 4
Beginner

Re: ATA-186 "SIP" won't take SCCP code via sata16us.exe

What command are you running from the command line?   You may need sata186us.exe -any2 [filename.zup]   The any2 will allow upgrade regardless of software type and version.

TONY

Explorer

Re: ATA-186 "SIP" won't take SCCP code via sata16us.exe

yes command line is

-any  -d  ataimagefilename.zup

sata186us "sees" my ATA and give me back the Image that is currently on the ATA.

However, the ATA is not taking commands from the phone. i.e. the 100#ip*address*8000#

Beginner

Re: ATA-186 "SIP" won't take SCCP code via sata16us.exe

Maybe try a new phone plugged into the phone 0 port on the ATA.   Do you any of the IVR prompts after you press the "button" on top of the ATA?

Also be sure to try -any2 as opposed to just -any.

Explorer

Re: ATA-186 "SIP" won't take SCCP code via sata16us.exe

afmmanicke wrote:

Maybe try a new phone plugged into the phone 0 port on the ATA.   Do you any of the IVR prompts after you press the "button" on top of the ATA?

Also be sure to try -any2 as opposed to just -any.

I didn't see anywhere to press the button on top of the ATA.  using the -any2 plus that did the trick!

However I have one ata that won't give me IVR prompts, so I guess I am SOL.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards