ATA 187 for Fax machines SIP to SIP ATA - CUCM - CUBE - ITSP
Hi all. Does anyone have found a recipe for running faxes through ATA 187 when using SIP all the way? The scenario is as follows:
ATA 187 - CUCM - CUBE - ITSP. The entire path is SIP up to the SP. We have tried all possible combinations from turning ECM off, reduce speed to 14,400 both of them in the fax machine, T.38, NSE g711 passthrough, passthrough both in the cube and in the CUCM, etc ... and fail to achieve the exact recipe for all outbound faxes work. some destination phone numbers work and other particular numbers do not work. All inbound faxes work well. The fax machines are a multifunctional Ricoh MP4000 and worked previously with the carrier using POTS. please help!
Cisco CUCM Connector for Work from Home/Field Executives Cisco CUCM telephony setup is deployed at enterprise networkAs per enterprise business requirement Sales Executive/Relationship Manger need to call their customers using the existing ente...
attached pdf is not final but sharing first version
will continue later hopefully with more hints and additions
note this is not an official guide, there is chance that I miss better alternatives
Hey All, Just thought I would share a good LDAP filter for CMS user import: (&(objectCategory=person)(objectClass=user)(telephoneNumber=*)person(sn=*)) This successfully imported 12500 users into CMS for me. Hope this helps.&...
All, when trying to create an end user I am getting the error message "KeypadEnteredAlternateIdentifier for ENd User Already exists" can someone give me a clue on what that means. I kinda figure it means the user with that nam...
Disclaimer: Yes, security fanatics may not approve of this (but, hey, they would probably never really approve of anything, anyway). However, for most pragmatists, this is a feasible solution with acceptable risk to an elevated credential...