cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1188
Views
0
Helpful
1
Replies

ATA 188s no longer registering CUCM 8

joveroc
Beginner
Beginner

Last year I upgraded from 4.1.3 to CUCM 8.5 and it seems like over the past year I have been losing my ATA 188 devices.  They worked fine after the upgrade but as time progressed they are no longer able to register.  I know there is not a load for the 188 in CUCM 8 but they did work fine for a while.  I'm curious if anyone else has ran into this issue.  I have been replacing them with 186 units which work fine.  The RTMT tool will show some of the 188 devices with a StatusReason of "DeviceNumberMismatch" when I looked this up it looks like a SIP error but these devices are SCCP.

I have accumulated a pile of 188s now wondering if they are useless or if there is some way to get them working again.

1 Reply 1

Hem Brahmi
Beginner
Beginner

The ATA 188 will not register , though if you try addidng it as ATA 186 , it will register with call manager version 8.x.

Make sure you give the DN as well to make it register.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers