cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1348
Views
0
Helpful
2
Replies

Audio codes MP-114

Working on converting some phones into our CUCM system.  In the environment being migrated they have audiocassette MP-114 devices performing an ATA function.  Will Cisco Call Manager v. 10.5 support these devices or will I have to replace them with Cisco ATA’s?

2 Replies 2

You can add them as 3rd party sip devices which is supported in CUCM

HARIS_HUSSAIN
VIP Alumni
VIP Alumni

1) I can see that MP-114 has 2 FXO ports. MP114 2FXS/2FXO ATA.

2) So to register any SIP Device with CUCM need a Unique IP and/or Port . Here MP114 will have single ip address but to register we need to configure the FXS line on MP-114 to use different port to register to CUCM.

 

   Below Post Might Help

https://community.cisco.com/t5/ip-telephony-and-phones/audiocodes-mp114-sip-registration-on-cucm-11/td-p/2848772

 

3) In CUCM You configure device as Third Party SIP Device.

   

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: