Solved: Authorization Codes on SPA with Communication Manager 10.5

jesusjimenez1 · ‎07-06-2016

Hello everybody

I have some SPA phones registered with Call Manager 10.5, and I configure Authorization Codes for users, but when I placed a call in this phones nothing happens.

Are there some posibility for configure this?

CIsco UCM: 10.5.2.13900-12

SPA 504G: 7.5.2

Regards!

Jaime Valencia · ‎07-06-2016

No, 3rd party devices cannot use FAC/CMC

The FAC and CMC tones play only onCisco Unified IP Phones that are running SCCP or SIP, TAPI/JTAPI ports, and MGCP FXS ports.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_010000.html

HTH

java

if this helps, please rate

View solution in original post

Jaime Valencia · ‎07-06-2016

No, 3rd party devices cannot use FAC/CMC

The FAC and CMC tones play only onCisco Unified IP Phones that are running SCCP or SIP, TAPI/JTAPI ports, and MGCP FXS ports.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_010000.html

HTH

java

if this helps, please rate