Dears ,
I have an issue with AA -TCL script ., we configured AA TCL Script for IVR on H.323 gateway to route calls to CUCM .
we can call this Script and can choice any option normal but when we try another call at same time it give us busy tone .
So this TCL script answer no more than one call at same time ,this is current configuration ,
also find attached output of these debugs during issue
debug voip application script
debug voip ccapi inout
debug h225 asn1
debug h245 asn1
application
service queue flash:app-b-acd-3.0.0.2.tcl
param queue-len 30
param aa-hunt10 101
param aa-hunt5 7888
param queue-manager-debugs 1
param number-of-hunt-grps 2
!
service aa-bvd flash:app-b-acd-aa-3.0.0.2.tcl
paramspace english index 1
param service-name queue
param number-of-hunt-grps 1
param dial-by-extension-option 6
param handoff-string aa-bvd
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 200
paramspace english location flash:
param second-greeting-time 60
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 700
param voice-mail 5003
!
dial-peer voice 20 voip
service aa-bvd
destination-pattern 200
session target ipv4:192.168.3.249
incoming called-number 200
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 21 voip
destination-pattern 7...
session target ipv4:10.1.20.254
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
telephony-service
moh enable-g711 "en_bacd_music_on_hold.au"
Thanks
Remon
