01-14-2019 12:22 PM - edited 03-17-2019 01:56 PM
Hi guys,
I have problem with B-ACD during options menu prompt we tried to press the digits but no answer. I need press very fast to works fine.
Problems: Collect digits during navegations in the IVR. After fineshed the audio menu prompt menu we have period of 15 second <silence> to prompt menu audio repeat again.
Following the configuration:
Dial peer voip (SIP ITSP Trunk)
dial-peer voice 10000 voip
service aa
destination-pattern 9725
session protocol sipv2
session target ipv4:192.168.30.254
incoming called-number 9725
voice-class sip bind control source-interface GigabitEthernet0/0/0
voice-class sip bind media source-interface GigabitEthernet0/0/0
dtmf-relay rtp-nte sip-notify
codec g711ulaw
no vad
Application created
application
service aa flash:app-b-acd-aa-3.0.0.5.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 5
paramspace english language en
param max-time-vm-retry 2
param aa-pilot 9725
paramspace english location flash:
param second-greeting-time 45
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 700
param voice-mail 9722
param service-name queue
!
service queue flash:app-b-acd-3.0.0.5.tcl
param queue-len 20
param aa-hunt3 1113
param aa-hunt4 1114
param aa-hunt1 9728
param aa-hunt5 1115
param aa-hunt2 1112
param number-of-hunt-grps 5
01-14-2019 07:30 PM
01-15-2019 05:22 AM
Hi
I have arealdy forced the relay and nte.
dial-peer voice 10000 voip
service aa
destination-pattern 9725
session protocol sipv2
session target ipv4:192.168.30.254:5060
incoming called-number 9725
voice-class sip dtmf-relay force rtp-nte
voice-class sip bind control source-interface GigabitEthernet0/0/0
voice-class sip bind media source-interface GigabitEthernet0/0/0
dtmf-relay rtp-nte sip-kpml sip-notify
codec g711ulaw
no vadq
Jan 15 11:16:41.275: //75563//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming PARAM
Jan 15 11:16:41.275: //75563//Digi:/C_DigitCollect_Start: Leg=75563, Dialplan=False, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=^@, Numpatterns=0, Maxdigits=1, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=20000, Mask=0 Hotword=0
Jan 15 11:16:41.275: //-1//Digi:/AFW_DigitCollect_New:
Jan 15 11:16:41.275: //-1//Digi:HN79595F47:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=^@ NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=1 DialPlanTerm=FALSE hotword=0
Jan 15 11:16:41.275: //75563/A1A506ACBDCE/Digi:/DigitCollectStart_UpdateStats:
Jan 15 11:16:41.276: //75563//Digi:/DigitCollect_MLPPTuning:
Jan 15 11:16:41.276: //75563//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Jan 15 11:16:41.276: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:16:41.276: //75563//Digi:/act_DCRunning_RDone: id=75563 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=0
Jan 15 11:16:51.291: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:16:51.291: //75563//Digi:/act_DCRunning_Digit: : pLeg 75563 Digit 6 Tone Mode 0
Jan 15 11:16:51.292: //75563//Digi:/DigitCollect_TreatDigit:
Jan 15 11:16:51.292: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:16:51.292: //75563//Digi:/act_DCRunning_RDone: id=75563 Reporting disabled.
Jan 15 11:16:51.292: //-1//Digi:/DigitCollect_Complete: DC_MATCHED_PATTERN. Digits=6
Jan 15 11:16:51.293: //75563//Digi:/AFW_M_DigitCollect_EventPreProcess:
Jan 15 11:16:51.293: //75563//Digi:/DigitCollectEnd_UpdateStats:
Jan 15 11:16:51.294: //75563//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming PARAM1
Jan 15 11:16:51.295: //75563//Digi:/C_DigitCollect_Start: Leg=75563, Dialplan=False, Diaplanterm=True, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=#, Numpatterns=0, Maxdigits=0, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=20000, Mask=0 Hotword=0
Jan 15 11:16:51.295: //-1//Digi:/AFW_DigitCollect_New:
Jan 15 11:16:51.295: //-1//Digi:HN7959866B:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=# NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=0 DialPlanTerm=TRUE hotword=0
Jan 15 11:16:51.295: //75563/A1A506ACBDCE/Digi:/DigitCollectStart_UpdateStats:
Jan 15 11:16:51.295: //75563//Digi:/DigitCollect_MLPPTuning:
Jan 15 11:16:51.295: //75563//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Jan 15 11:16:51.296: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:16:51.296: //75563//Digi:/act_DCRunning_RDone: id=75563 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=1
Jan 15 11:17:14.468: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:14.468: //75563//Digi:/act_DCRunning_Digit: : pLeg 75563 Digit T Tone Mode -1
Jan 15 11:17:14.468: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:14.468: //75563//Digi:/act_DCRunning_RDone: id=75563 Reporting disabled.
Jan 15 11:17:14.468: //-1//Digi:/DigitCollect_Complete: DC_TIMEOUT. Digits=
Jan 15 11:17:14.468: //75563//Digi:/AFW_M_DigitCollect_EventPreProcess:
Jan 15 11:17:14.468: //75563//Digi:/DigitCollectEnd_UpdateStats:
Jan 15 11:17:14.469: //75563//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming PARAM
Jan 15 11:17:14.469: //75563//Digi:/C_DigitCollect_Start: Leg=75563, Dialplan=False, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=^@, Numpatterns=0, Maxdigits=1, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=20000, Mask=0 Hotword=0
Jan 15 11:17:14.469: //-1//Digi:/AFW_DigitCollect_New:
Jan 15 11:17:14.470: //-1//Digi:HN7959E0F1:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=^@ NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=1 DialPlanTerm=FALSE hotword=0
Jan 15 11:17:14.470: //75563/A1A506ACBDCE/Digi:/DigitCollectStart_UpdateStats:
Jan 15 11:17:14.470: //75563//Digi:/DigitCollect_MLPPTuning:
Jan 15 11:17:14.470: //75563//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Jan 15 11:17:14.470: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:14.470: //75563//Digi:/act_DCRunning_RDone: id=75563 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=0
Jan 15 11:17:20.907: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:20.907: //75563//Digi:/act_DCRunning_Digit: : pLeg 75563 Digit 6 Tone Mode 0
Jan 15 11:17:20.908: //75563//Digi:/DigitCollect_TreatDigit:
Jan 15 11:17:20.908: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:20.908: //75563//Digi:/act_DCRunning_RDone: id=75563 Reporting disabled.
Jan 15 11:17:20.908: //-1//Digi:/DigitCollect_Complete: DC_MATCHED_PATTERN. Digits=6
Jan 15 11:17:20.908: //75563//Digi:/AFW_M_DigitCollect_EventPreProcess:
Jan 15 11:17:20.909: //75563//Digi:/DigitCollectEnd_UpdateStats:
Jan 15 11:17:20.909: //75563//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming PARAM1
Jan 15 11:17:20.909: //75563//Digi:/C_DigitCollect_Start: Leg=75563, Dialplan=False, Diaplanterm=True, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=#, Numpatterns=0, Maxdigits=0, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=20000, Mask=0 Hotword=0
Jan 15 11:17:20.910: //-1//Digi:/AFW_DigitCollect_New:
Jan 15 11:17:20.910: //-1//Digi:HN7959FA19:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=# NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=0 DialPlanTerm=TRUE hotword=0
Jan 15 11:17:20.910: //75563/A1A506ACBDCE/Digi:/DigitCollectStart_UpdateStats:
Jan 15 11:17:20.910: //75563//Digi:/DigitCollect_MLPPTuning:
Jan 15 11:17:20.910: //75563//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Jan 15 11:17:20.911: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:20.911: //75563//Digi:/act_DCRunning_RDone: id=75563 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=1
Jan 15 11:17:44.095: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:44.095: //75563//Digi:/act_DCRunning_Digit: : pLeg 75563 Digit T Tone Mode -1
Jan 15 11:17:44.095: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:44.095: //75563//Digi:/act_DCRunning_RDone: id=75563 Reporting disabled.
Jan 15 11:17:44.095: //-1//Digi:/DigitCollect_Complete: DC_TIMEOUT. Digits=
Jan 15 11:17:44.095: //75563//Digi:/AFW_M_DigitCollect_EventPreProcess:
Jan 15 11:17:44.095: //75563//Digi:/DigitCollectEnd_UpdateStats:
Jan 15 11:17:44.096: //75563//Digi:/tcl_LegDigitCollectObjCmd: collectdigits leg_incoming PARAM
Jan 15 11:17:44.096: //75563//Digi:/C_DigitCollect_Start: Leg=75563, Dialplan=False, Diaplanterm=False, DigitReport=False, DigitConsume=False IgnoreInitialKey=False, IgnoreDTMFacceptINFO=False, Abortkey=*, Terminationkey=^@, Numpatterns=0, Maxdigits=1, Mindigits=0, Interruptprompt=True, InterTimeout=-1000, Initialtimeout=20000, Mask=0 Hotword=0
Jan 15 11:17:44.096: //-1//Digi:/AFW_DigitCollect_New:
Jan 15 11:17:44.097: //-1//Digi:HN795A54AC:/AFW_DigitCollect_New: DialPlan=FALSE AbortKey=* TermKey=^@ NumPatts=0
Enable=FALSE Consume=FALSE InterruptPrompt=TRUE minDigits=0 maxDigits=1 DialPlanTerm=FALSE hotword=0
Jan 15 11:17:44.097: //75563/A1A506ACBDCE/Digi:/DigitCollectStart_UpdateStats:
Jan 15 11:17:44.097: //75563//Digi:/DigitCollect_MLPPTuning:
Jan 15 11:17:44.097: //75563//Digi:/DigitCollect_MLPPTuning: Precednece Digit Collect not enabled
Jan 15 11:17:44.097: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:44.097: //75563//Digi:/act_DCRunning_RDone: id=75563 Enable succeeded.enable=0 matchDialplan=0 numPatterns=0matchDialplanTerm=0
Jan 15 11:17:47.451: //75563//Digi:/AFW_M_DigitCollect_Action:
Jan 15 11:17:47.451: //75563//Digi:/act_DCRunning_Disconnected:
Jan 15 11:17:47.451: //-1//Digi:/DigitCollect_Complete: DC_DISCONNECTED. Digits=
Jan 15 11:17:47.452: //75563//Digi:/AFW_M_DigitCollect_EventPreProcess:
Jan 15 11:17:47.452: //75563//Digi:/DigitCollectEnd_UpdateStats:
01-15-2019 08:46 AM
Hi
After setup the b-acd aa, I noticed that take long time to repeat the audio prompt menu, there a silence and when press any option menu did not work. However when audio is playing and press option it works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide