b-acd script doubt in CME ISR4331

[dsobrinho]

Hi team,

We would like to know if I really need download the tcl file script and upload in the flash of the router, or are there an embed script in the ISR 4331 that could be used?

So I start the configuraiton and all param are available in the router.

I have not test before but I would like to know if I need only upload the audios with and rename to the application configuration?

application
 service aa app-b-acd-aa
  paramspace english index 1
  param number-of-hunt-grps 6
  param handoff-string aa
  param dial-by-extension-option 3
  paramspace english language en
  param max-time-vm-retry 2
  param aa-pilot 9728
  paramspace english location flash:
  param second-greeting-time 60
  param welcome-prompt _bacd_welcome.au
  param call-retry-timer 15
  param max-time-call-retry 700
  param service-name queue
!
 service queue app-b-acd
  param queue-len 15
  param aa-hunt1 81001
  param aa-hunt2 81002
  param aa-hunt3 81003
  param aa-hunt4 81004
  param aa-hunt5 81005
  param aa-hunt6 81006
  param number-of-hunt-grps 6

Best regards,

[Sreekanth Narayanan]

If you are using the embedded script, you could follow this example.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl/40bacd.html#pgfId-1083384
In the embedded script, I don't think the name is required after "service".
The BACD scripts available on cisco.com are the latest, and contain the latest fixes, so they are recommended. I would recommend using them. The zip file comes with the script and audio.

[dsobrinho]

Thanks a lot @Sreekanth Narayanan

This information was enought for me.

[Sreekanth Narayanan]

You're welcome! :)