cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1965
Views
3
Helpful
4
Replies

Basic Question for configuring 7914 with CME

amiralisetoudeh
Level 1
Level 1

Ok - I've searched google for a few hours before posting this and hadn't found the information I needed, so I figured I'd ask the gurus over here.

Basically, I have a small office with 8 phones and 2 have the 7914 expansion card on them, and I'm using Call Manager Express on a 2821.

All I want to do is configure the darn things, and all I wanted was a step by step to do this, this and that and done.

Is there a configuration guide out there that I'm not finding or is this top secret info?

and just to make sure, would it matter if the phone was turned on while I'm configuring them (the cards) or not?

Thanks,

Al

1 Accepted Solution

Accepted Solutions

CCME v4.0 Administration Guide

Phone Provisioning

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8022.html#wp1004067

The expansion card is attached to the phone, so you have to configure them both together, or rather the expansion module configuration is part of the phone configuration.

View solution in original post

4 Replies 4

gogasca
Level 10
Level 10

Hi Al,

Heres a sample config for my lab CME}.

tftp-server flash:S00105000200.sbn

!

telephony-service

load 7960-7940 P00308000400

load 7914 S00105000200

max-ephones 16

max-dn 32

ip source-address X.Y.Z.W port 2000

timeouts interdigit 7

timeouts ringing 15

system message APAC CCME

create cnf-files version-stamp 7960 Feb 22 2007 05:07:28

voicemail 33999

max-conferences 4

dn-webedit

transfer-pattern 3....

secondary-dialtone 9

!

ephone 1

mac-address 000D.BC04.9885

type 7960 addon 1 7914

button 1:1 7:30 8:31 9:32

ephone-dn 1 dual-line

number 33001

label 33001

name APAC 1

call-forward busy 33999

call-forward noan 33999 timeout 12

!

ephone-dn 30 dual-line

number 33030

call-forward busy 33999

call-forward noan 33999 timeout 12

!

!

ephone-dn 31 dual-line

number 33031

call-forward busy 33999

call-forward noan 33999 timeout 12

!

!

ephone-dn 32 dual-line

number 33032

call-forward busy 33999

call-forward noan 33999 timeout 12

HTH

paolo bevilacqua
Hall of Fame
Hall of Fame

Configuration guide, command reference, network design reference manual, ad-hoc TAC guides and this forum itself. CME (and in general, IOS gear) use and fine configuration is far from secret. Just type freely in the search form on CCO and you will be overwhelmed by the information available.

amiralisetoudeh
Level 1
Level 1

Hey guys thanks for your replies... I appreciate the sample config - It's just that I'll need a step by step for configuring it, and I don't know why it's not 'easily' available. (believe me, I searched google and cisco for hours)

And to the second reply, I said I've already searched most of what I've known to be resourceful - no luck.

I probably should restate that I'm looking to configure the 7914 expansion card, not the phone itself - plus, I'm using Call Manager Express.

It should be really simple... and all I need is a little pdf from Cisco that explains it... nothing tough.

Thanks,

Al

CCME v4.0 Administration Guide

Phone Provisioning

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00806a8022.html#wp1004067

The expansion card is attached to the phone, so you have to configure them both together, or rather the expansion module configuration is part of the phone configuration.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: