cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
623
Views
0
Helpful
3
Replies

BAT - Add a specific service to a button

rcrumm_2
Explorer
Explorer

Hello,

I need to BAT in a service on a  large number of phones. If button #4 was a serviceURL button how can I BAT in a particular service?

 

Thanks,

 

Randall

 

1 ACCEPTED SOLUTION

Accepted Solutions

slashdots
Beginner
Beginner

Hi Randall

You have to do these steps for each Device Type you're using. As always you should do this on a test phone befor doing it on all devices.

1. Create a Phone Button Temlpate which matches your needs.

You can do this under: Device -> Device Settings -> Phone Button Template

2. Create a Phone Template which has the correct Service assigned.

You can do this under: Bulk Administration -> Phones -> Phone Template

You could also fully configure the phone which can make adding new phone much more easy.

3. Create a Bulk Job which assigns the Phone Button Template and the Services from the Phone Template
Be sure to have ticked the following fields:

Device Information
- Phone Button Template

Assign IP Phone Serices

- Add all services from this template

- Remove Duplicate

 

Cheers
slashdots

 

 

 

View solution in original post

3 REPLIES 3

slashdots
Beginner
Beginner

Hi Randall

You have to do these steps for each Device Type you're using. As always you should do this on a test phone befor doing it on all devices.

1. Create a Phone Button Temlpate which matches your needs.

You can do this under: Device -> Device Settings -> Phone Button Template

2. Create a Phone Template which has the correct Service assigned.

You can do this under: Bulk Administration -> Phones -> Phone Template

You could also fully configure the phone which can make adding new phone much more easy.

3. Create a Bulk Job which assigns the Phone Button Template and the Services from the Phone Template
Be sure to have ticked the following fields:

Device Information
- Phone Button Template

Assign IP Phone Serices

- Add all services from this template

- Remove Duplicate

 

Cheers
slashdots

 

 

 

Thanks!

 

I figured it out shortly afterwards. On the template I added SURL to the button and then specified the service.

 

That worked for me.

 

Randall

 

This only works if all of your phones share a common configuration, correct?

I.e., Take two 7965's for example, where one phone has a PBT of 1 Line 5 Speed and then other is 2 Line 4 Speed.   You would have to have two phone templates and two different BAT jobs.  One with a new PBT of 1 Line 1 SURL 3 Speed and one with 2 Line 1 SURL 2 Speed.

That's just one small example.  What if you had the new fancy Invididual PBT on your phones?  Now you have no idea what to "reset" the PBT to.
 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: