10-18-2012 08:15 AM - edited 03-16-2019 01:45 PM
Hello All
How do I use bat to associate the line to a user. I can't seem to find the relevant field in the bat template.
See attached print screen of the field in question.
Thanks
Feisal
10-18-2012 11:08 PM
Hi Feisal,
Are you planning to associate the device to the user? if yes, use the BAT Users teplate and make number of controlled devices as 1, there will be an extra column getting added to this User telmplate fill it accordingly and upload it.
Hope it helps.
Anand
Please rate helpful posts !!
02-05-2016 03:32 AM
10-19-2012 12:21 AM
You already got a reply from Leonardo in your post about Jabber reporting and add CSF devices using BAT.
Here's the link again in case you missed it the first time.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b6e537.shtml#prob1
Please rate all useful posts.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Hi,
Hope this doc helps.
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/bulk-administration-tool/110967-bat-00.html#line
Thanks,
Andrew.