cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
453
Views
0
Helpful
1
Replies

BAT Error for Jabber

kyle_hanson
Beginner
Beginner

Trying to bulk create Jabber CSF phones, but keep getting errors. I started with All Details and have slowly dropped to specific and very few, but the following error keeps happening...

 

Failure Details :

 

MAC Address/Device Name Error Code Error Description

-----------------------------------------------------------------------------------------

is not a supported field.

 

I've checked the file and there's no blank fields. I've trimmed it down to the following...

 

Device Name,Description,Owner User ID,Directory Number 1,Route Partition 1,
TAALGAARD,Toni Aalgaard PC Jabber,taalgaard,57235,INTERNAL_PT,
DAFLALO,Dan Aflalo PC Jabber,daflalo,47316,INTERNAL_PT,
ROBA,Rob Agnew PC Jabber,roba,64052,INTERNAL_PT,
RALAWAR,Raid Alawar PC Jabber,ralawar,47035,INTERNAL_PT,
RALEXANDER,Ray Alexander PC Jabber,ralexander,54356,INTERNAL_PT,
BRALLEN,Britney Allen PC Jabber,brallen,55809,INTERNAL_PT,

 

What am I missing here?

1 Accepted Solution

Accepted Solutions

Vaijanath Sonvane
VIP Advocate VIP Advocate
VIP Advocate

Instead of Device Name, it needs to be MAC Address. Here is the correct format:

MAC ADDRESSDESCRIPTIONOWNER USER IDMOBILITY USER IDUSER IDDIRECTORY NUMBER  1

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

1 Reply 1

Vaijanath Sonvane
VIP Advocate VIP Advocate
VIP Advocate

Instead of Device Name, it needs to be MAC Address. Here is the correct format:

MAC ADDRESSDESCRIPTIONOWNER USER IDMOBILITY USER IDUSER IDDIRECTORY NUMBER  1

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers