05-24-2012 03:50 AM - edited 03-16-2019 11:19 AM
Dears,
Everything was fine with my cluster of two VMs with version 8.6 installed on UCS server.
After one week, the customer asked to change the password for all the users, I logged in to CUCM administration page, and here is the surprise, I didn't fine the BAT tab. I tried to search on the problem but I couldn't find any thing helpful.
Waitiing your support
Regards,
Haytham
05-24-2012 03:54 AM
Hi Haytham,
Strange things happen sometimes
Check your BPS (bulk provisioning service) on your publisher. Is it still running/activated..Maybe you should give it a kick! I.e restart the service
05-24-2012 03:55 AM
Sorry,
It seems the customer swapped the IP addressing between the pub and sub. and I was accessing the wrong IP.
BAT menue is accessable only from the publisher.
Thanks
05-24-2012 04:20 AM
Well, all is well that ends well
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide