Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,I am seeking help on how to provision my new 8841 3PCC phone. I am able to log into the phone and I am at the web GUI. I have set the SIP extension as a PJSIP extension of my server. When the phone reboots, I have a yellow light on the line but...
Hi, We have SIP Trunk between CUCM 12.5 and 3rd party PBX name is HarisWe are facing DTMF problem over this Trunk I have tried the 3 available options for DTMF on the SIP trunk with no success [No Pref, RFC2833, OOB and RFC2833]I got the traces and f...
I've been looking to get off the Cisco forced obsolescence refresh cycle for a while now. Being forced to blow $15000 every 5 years just to keep using 75 basic desk phones with voice mail is such a joke. A Raspberry Pi VOIP server would probably cove...
Cisco CUCM 12.5 - UCCX 12.5 - Windows 10. We are using Spok Medicall in our call center. The agents use a modified version of CAD or Finesse to control the phones. After a Windows update we noticed that the CTI service will not start. I have uninstal...
We are currently trying to perform conference calls using the API call "CONFERENCE_CALL_REQ" from "CTI Server Message Reference Guide(Protocol Version 24) for Cisco Unified Contact Center Enterprise, Release 12.6(1)" This conference request works fin...
Hi all,the users at one of our site(A) have setup call fwd on their desk phones to their mobile numbers. If some one calls the desk phone which has call fwd setup the receiver sees the default number 1803 instead of the actual caller id. This happens...
I am trying to figure out a way when a user dials a number say 911 it will automatically do a conference and dial another number to conference our security console onto the call as well.Would CUCM even be able to do this? Or would we need Emergency R...
Hi,We are using Cisco phone CP-8811-3PCC in our office, which is connected to Asterisk proxy server. We are getting a lot of ICMP traffic from the phones towards Asterisk proxy server. We have also used other Cisco phones 7960, SPA504G, SPA509G but n...
Hi,We are a big company looking to use around 2000 iPhone's as a wireless connection inside the company.Does anyone know a good company and it has experience to help us implement that?Thank you
Hi Good People, Please help me to find out what exactly is the problem with my VG E1 PRI, incoming calls never reach call control. Call Control Team (Avaya) says, they never receive any logs coming from my router. However, if I check the debug output...
Hi, I've setup a sip trunk between a yeastar gateway and CUCM v10.5.When I make calls to the CUCM the caller ID is replaced by a DDI. I captured some packets on the gateway to make sure that the caller ID is sent. Now I don't know why does the CUCM r...
Hello All,I'm trying for weeks to make it work, Asterisk SIP (local) and Webex-(video)calling together on one CP-8845-3PCC (MPP) phone. Doesn't work. What I've done and wat is working:Local Asterisk PBX: Working with 4 extensions.Working remote PBX (...
Hello. I can't hear the beep after receiving "181 Call Is Being Forwarded".Device Cisco 8841 with firmware 11-3-3MPP and 11-3-5MPP.If there is no message (181 ...) - all is wellHas anyone encountered a similar problem?
Hello. I have UC device Cisco 8841 with firmware 3CPP/MPP.During a call, you can hear the conversations in the background very well. I set "Microphone Gain" to "minimum", but it did not help. How else can you reduce sounds in the background?
The customer wants to Integrate the C8300 Router with Alcatel OXY PBXOPTION 1Modules and Configuration as follows:C8300 with NIM 4 Port FXO , 4 PORT FXS, PVDM 128The Router is also going to Work as MPLS GatewayLocation 1: Alcatel PBX will be integra...
