Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am using a Cisco landline phone at work. I am hard of hearing and wear hearing aids, but still have trouble hearing on this work phoneIs there an amplifier available to purchase. If so do I need to know the model number of the Cisco phone that I am...
Hello, I have a Cisco Router 2911/K9 that has EVM-HD-8FXS/DID Card installed with EM-HDA-3FXS/4FXO and EM-HDA-6FXO daughtercards. Now i want to upgrade my router and as i followed the cisco replacement path i found that C8200-1N-4T is the replaceme...
Hello, I have Cisco CME and Phones 8851 I configured BLF on my user, that secretary know that other line is busy. I used this configuration blf-speed-dial 1 673 label "ZZZZZ"blf-speed-dial 2 674 label "VVVVV" for that two user and i add in dn all...
Hopefully this isn't too mundane of a question, but I cannot get the 860 wireless to display 3 lines.
Hi, I have a customer with BE6000 M4 servers who is looking to replace the hardware as End of Support was reached back in June 2023. The latest version of the UCS C-series is the M7 but no BE6000 or BE7000 servers based on that hardware seem to have ...
My phone will not completely register or update. The screen is blue and say registering.
before update certificate:- After update:- I think after update effected to sync LDAP server. I came across a document that mentioned the need to restart the system certificate after updating them. I'm seeking advice on how to process with this as...
can i use CP-8845 VOIP phone for third-party voip solution, i would like to use BSNL Voip with Cisco VOIP phones
Kindly advise if a 3rd party Hotline analog phone like VK-K-1900W-2 is compatible with Cucm via VG400
So my wife's employeer gave her this VoIP phone to use while WFH, I just realized that it has a USB port which I tried to connect stuff to and nothing seems to work, not even charging. While messing around (since he employeer is a cheap MF) to find a...
Hi All,We are planning to upgrade our current CME 2900 series with a newer Cisco 8200 series. Additionally, we are also looking to replace our existing Cisco 8821 wireless phones with the newer Wireless Phone 840 and 860 models.I'm curious if the new...
I seem to be making eBay sellers wealthy (sort of) by buying CISCO ATA products. I have used Obi (Plantronics) and Grandstream ATA units but found both lacking in some features, so I thought I'd try Cisco. Both Obi and Grandstream are straightforw...
Under what scenario and When is it necessary to have PVDM installed on voip router like 8200 4000 Does this apply to voip router cme directly connected to service provider sip line? Is this needed on srst voip gateway router?
Hi,We need to buy 4321 V/K9 router for 2 Port T1/E1, where we are terminating 2 PRI lines.So for 2Port T1/E1 we need to buy 64 PVDM4. Also, for conference, transcoding etc we need another 64 PVDM4. This option will be bit costlier.Can we buy 128 PVDM...
Hello,I have a 4331-V/K9 that I would like to use for an IP phone system. It currently has IOS-XE 16.3 installed and has a permanent UC license. I see that the SWSS licensing is EOS and that flex is the only option:https://www.cisco.com/c/en/us/pro...
