Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi guys,I am about to make an IP Phones migration from CUCM 9.1 to CUCM 12, I have migrated the database from CUCM 9.1 to 12 through PCD, but the hostname and IP of the new cluster have changed. I would like to know if I have to Migrating ITL files t...
hello,we have cp8851. when calling a busy line the phone continues to play a busy sound and does not disconnect.any ideas ?
Hi, I have been asked to audit all of the analog phones, i.e., to give a total number of. We have 9 x VG350s using both MGCP and SCCP; CUCM version 10.5.Is there an easy way to produce the totals for analog phone device types rather than to count eac...
Hello, We are trying to send a fax from VG-310 --> CUCM-->ISPwe are getting Bearer Capability Not Implemented (65) and user getting a busy signal.So, I took G729 off and tried only with G711 and now it is User Busy(17)The SDP in the invite has annexb...
I need some clarification on Calling Name. when you set the Display Field on the line whatever you set here seems to show up on the phone you called internally as well as externally if external is allowed on the caller. Is there anyway to setup a di...
Hello everyone, I want to ask a Cisco voice question.The customer originally had a Cisco 3945E router, and the customer feedback 78XX phone did not display the missed call. The query was found to be a bug in Cisco. We upgraded the version and have up...
Phone model: 7841 or 6921 is stuck after long use.. the problem is only with one extention.. and it repeatable issue.. Phone firmware: sip78xx.11-7-1-17CUCM version: 10.5.2.11900-3This issue is not limited to only PST gateways calls, as internal call...
Hello Everyone, I'm trying to connect a wireless phone 7921G to our existing wifi AP's (Ruckus R310), Created a unique SSID for it without any security (Open wifi without password) but couldn't connect to it, and shows Connection failedwent through d...
I have two extension line one Cisco IP phone, we need to assign different device pool to each extension. is that possibleso the phone shall have two device pool.
Dear All,I have a few Cisco 8865 and DX650 connected over Cisco Phone VPN. The VPN is terminated on the Cisco IOS router (2900 Series). Now my company changing is DC to another City and will be having a Different Provider or IP address. The VPN setti...
I have an issue with a 8845 that I am not able to select the ABC softkey (grayed out) , I would like to do a sipurl dial, however I don't see the options for CME 12.5 not running CUCM. Any help would be appreciated. 8845 running, load 8845 sip8845_65...
Hello all, If I read the manual correctly the only thing needed for remote connectivity of an 8851 if the CUCM is configured correctly is for the unit to register to the CUCM at least once on the LAN. After that you can plug the 8851 into any et...
My Company is looking at using Zebra TC51-HC devices loaded with Jabber to replace dedicated bar-code scanners and wifi phones. One issue im seeing is that the Jabber app in speaker mode is horrible/unusable. It appears that the device attempts to ad...
Hi this is kinda of a simple question but, I think there are several ways to achieve this. CUCM 11.5 I have a requirement where I have two DN's in a line group that the customer wants to ring forever until answered. Line Group RNA is 180 seconds maxi...
Hi We synchronized users from company AD and LDAP authentication is not enabled. My question is what is the default password and PIN for these uses? Thanks a lot!
