Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All,We have a publisher and a subscriber and 2 offices. Currently all phones are registered to publisher. How do i force 1 office to register to publisher and the other half to register to subscriber? CUCM version is 8.5Thanks
Hello all Hope someone can help...We have Cisco 7942 IP Phones.We can make outgoing calls.We can receive incoming calls.We can transfer incoming calls to other internal phones.We cannot however make internal calls!When we try the phone rings but no-o...
We are considering purchasing 8845 / 65 phones. Our only hold up is we cant seem to location a photo or the wall mount used for these phones or a photo of one mounted to a wall. Does anyone have either they could provide? Thanks!
Good morning. I'm having a bit of an issue with my Cisco 8865. For about 8 months, this phone as worked flawlessly with my Plantronics Voyager Legend headset. It always connected, disconnected, answered/released calls, etc. Just the other day, with n...
Is there a place within the WebEx Control Hub to change how transferred calls are handled? Right now, our receptionist will transfer an external call to someone inside the company, and instead of it showing the person's caller ID, it shows the recep...
Hello, collaboration professionals! Please, answer to my question. Where is 3PCC firmware for 7800 and 8800 series phones. Can I change firmware for existing 7800/8800 phones with CUCM firmware to 3PCC , and if I can, how to do it? Thank you.
Has anybody encountered an issue where your 88XX (specifically 8851) phones have randomly exhibited off-hook/on-hook tendencies? Over the past year we have had upwards of 250+ phones randomly go off-hook then on-hook in less than a second, sometimes...
Hi, I am trying to set up Cisco CP-7841 with a third party Hosted VoIP service provider (SIP) but I was failed to configure the same, There is no CUCM or any other Cisco Call manager involved. When I switched ON the device it is asking activation co...
I have a Cisco 8845 phone that has SIP894x.9-4-2SR2-2 firm ware on it. everything works fine except it does not show missed/received/dialed calls. I downloaded the file cmterm-8845_65-sip.12-1-1SR1-4.k3.cop.sgn and uploaded it to call manager OS. ...
I have an issue with my cisco SX20 when displaying to Samsung Smart TV NU7100 series Today, I bought a new tv to connect to my sx20, but it just display while cisco loading mode, after that screen has blank mode I have no idea, how to display it to m...
Hi,We are running CCM 4.1(3).We are facing problem on some of the IP Phones(7940), like receiver of these phones are not working.You can only able to hear the voice from Speaker mode.While ringing if receiver goes off-hook, still the rings are conti...
Hello Everyone, I have a 3925E running CME 11.0 with a mix of SSCP phones and one 7821 SIP phone. The SCCP phones are registered and working just fine. The SIP phone pulls DHCP but never registers. A "debug tftp events" on the CME reveals no TFTP tr...
I am facing a issue where some IP Phone are Picking Voice VLAN IP & some are picking Data VLAN IP...don't know where to troubleshoot on Switch or at IP Phone ...or at AD server where DHCP configured
Hi, I see that the 8861/8865 phones support external speakers. Has anyone tested these with external speakers? Good/Bad? Specifically looking to use them in a warehouse environment Cheers
I have a Cisco CP-8831 conference phone and CUCM 9.1. I have added and applied the firmware and related files to CUCM cluster and the system does recognize 8831. I add the phone and the phone is receiving all needed TFTP, CTL infor...
