IP Telephony and Phones

7821, 8845 admin settings password (with CME)

Hi, We've installed a CME 10.5 with 7821 and 8845 phones. After they've registered to the CME, it's impossible to access the admin settings of both phones, they are locked by a password... Can someone tell me if there is a default password or how to ...

Resolved! Expressway and third party xmpp clients

Hello, we have Expressway X8.8.1 up and running, it works fine with the Cisco Jabber clients. Is it possible to log in with just a chat client to Expressway Edge? For example pidgin or swift (open source xmpp clients). Do we need an extra license o...

Is there a way to clone the ISM Module without sync with the CUCM?

My customer bought new ISM and want to have the same configuration as old one. But they did not permit me to enter their site to connect with their CUCM. Is there any way to clone it by TFTP the file via CLI?

How to change the CUCM admin page idle logout time

Can you change the CUCM administration page idle logout time? If so, how? I'm working on this is a lab and every time I step away to do something, I have to log back in. Can I increase the time for automatic logout? This is CUCM 6.0.1. Thanks.

Cucm 11.1 background noise on 8841

I have voice quality issue with my new deployment Using 8841 endpoints and running latest firmware sip88xx.11-0-1-11. It seems that there is a lot of background noise it sounds like humming noise on max volume, It is not noticeable at half volume. I...

Cisco 8861 and Lenovo Network Drivers

Hello everyone. I am curious if anyone else has seen this issue. We have a peculiar issue that I cannot find any information on. The issue began sometime last year. We noticed certain computers that were plugged into the switchport of 8861's were dr...

Conference call in preservation mode on cisco 7821 IP Phone.

Hello All, We are facing one issue on Cisco 7821 IP Phones. This issue is intermittent. Faced it twice in last few days. Conference call goes in preservation mode. None of the parties in call can hear, No soft key works. And need to terminate confere...

unable outgoing call from cme

Dear Sir, i need help i am unable to make outgoing calls i have cme setup i also post my config file

Call Back Features on CP - 8841

Hi, I would like to ask anyone set up before call back softkey on CP - 8841 model. I managed to set and has the call back button when ringing out. But when I press on the call back button is does not have any effect or show anything. I need your...

Live Call Recording on Cisco Unity 10.5 using Built-in Bridge

Hi, I setup the Live recording on unity and tested ok by dialing the DN in cucm 8001 and it's recording successfully. I setup a recording profile and enabled the phone to selective call recording. When i do a test call and press record on the phon...

Translation patterns and hunt pilot problem

Hi GuysI have the follow problem: I have a Translation Patterns in the CUCM and in the Called Party Transform Mask option have a Hunt Pilot number, but not works.If I put a DN, works fine.Any idea?TIACristian

Resolved! updating LDAP on cucm?

I need to update the LDAP server on my cucm "10.5.2" i have some questions: 1- is there other places under cucm administration beside "system>LDAP>LDAP directory" and "system>LDAP>LDAP authentication" where i need to change the LDAP ip addresses? 2- ...

redundancy

Hi, route list GW1 --- did range 33330000 -33330100 GW2 ---did range 22220000 -22220100 1. 9.[2398]XXXXXX ----National-1--- RL-GW1-GW2 2 9.[2398]XXXXXX ----National-2----- RL-GW2-GW1 it works fine . Now if GW1 failed and DID 33330099 calling 23XXXXX...

Resolved! How can I block outgoing calls to specific number?

Hello to all! I want to block outgoing calls to list of specific numbers: 08444 63959508719 97737308444 20646408717 70464609115 02252508444 66062009119 21022009112 070120 How can I do this? Thanks to all!

Resolved! Restrict User Login to Unity Connection by Using Primary Line Only

Hi there, I am facing a problem that user cannot login to their voice mail box if they are not using their primary line. And I would like to know if there is any setting related to this situation. That is a fresh installed unity connection (v11.0) c...

IP Telephony and Phones

Forum Posts

7821, 8845 admin settings password (with CME)

Resolved! Expressway and third party xmpp clients

Is there a way to clone the ISM Module without sync with the CUCM?

How to change the CUCM admin page idle logout time

Cucm 11.1 background noise on 8841

Cisco 8861 and Lenovo Network Drivers

Conference call in preservation mode on cisco 7821 IP Phone.

unable outgoing call from cme

Call Back Features on CP - 8841

Live Call Recording on Cisco Unity 10.5 using Built-in Bridge

Translation patterns and hunt pilot problem

Resolved! updating LDAP on cucm?

redundancy

Resolved! How can I block outgoing calls to specific number?

Resolved! Restrict User Login to Unity Connection by Using Primary Line Only

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

SQL table for CDR

Incoming calls show as forwarded

CUCM sends wrong device ID to Recording System

CDR reports: Request for activity on multiple lines

I get dozens of these alarms on WU, but no errros on controller

SIP Trunk STC

4331-Vk/9 router replacement can it be C8200L-1N-4T

CUCM 14 "Operation Completes by" Problem with 2023

Call forwarding not working ( Vodafone Germany)

7861 BLF Phone not showing green idle status.