Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All, I am configuring an MGCP gateway it shows registered on the IOS but unregisterd in CUCM. I have added bind commands as attached.
No reports are working. Please escalate as this has been going on for 60 days and is causing negative business interruptions. Any ETA on being resolved would be very much appreciated. CR ID 22955. Thank you.
Hi, I have migrate the system from CM 7.1 to 11.5, but there is something missing from the previous configuration. User told me that she could check what is the status of the person to whom she wants to transfer the call. Not sure what to look for r...
Hi guys , Problem description: When you disconnect or turn off a station connected to your phone, the MAC still appears in the port on the switch for a few minutes. When the station is directly connected to the switch, the MAC drops immediately upo...
Does anyone know what's happening about a patch/update for CUCM for the Struts vulnerability? The initial release date for a patch was something like 23rd March. That got pushed back to 31st March, but as of 6th April, there's still no patch that I c...
Hi, We have this issue that suddenly outgoing and incoming calls are not working. Tried to check the logs and found out below error. Are this error a bug issue? as workaround we just perform a reload every time we encounter the same issue. 012769: ...
Hi guys, Suddenly the users are complaining that the phones are rebooting randomly in different time also some users experience this issue more than other. Also the phones are in different types (9971 - 8961 - 7841 - 6941 and other SCCP types) so th...
Hi all, I think I have a problem with my carrier but, I would like a second opinion and really what I need to say to them to fix the problem besides that the outbound call will not work. I have a Cisco 2911 running voice/CME IOS 15.2.4...up until a ...
Hi Experts, .:: I'm getting a weird issue. MGCP FXS Port at VG224 shows 'Registered' at the Call Manager. But the Analog phone connected at the port is not able to receive any incoming calls. Getting Fast busy tone while dialing the Analog phone's n...
Hello All, Per this thread and other Cisco documentation for CUCM 8.6, https://supportforums.cisco.com/discussion/11683541/route-list-can-not-contain-qsig-and-sip-trunks, I see that Route group cannot contain 2921 MGCP QSIG gateways (In my customer'...
How do we export the current cucm configuration(includign gateway,phone,UDP etc) for all the region in cluster or do we have to export seperately phone, gateway etc.
I've replaced a 2811 router with a 2911 router, and now the SRST lines don't register in Call Manager (v10.6). I've verified that I have the correct voice ports configured and all of the other commands seem to be correct (I have done this before, cop...
I am using Call manager version 10 just just tried to check voice mail but when i press message button it continuous ring on voice mail number i have tried from other phones but the result same. Can anyone help please?. The CUC version is 10.5.2. I ...
Hi Experts, Some one can support in how can I allow IP Phones to access the internet through server gateway to enable the rss feed services & other services as well. Noting that the voice Vlan cannot access the internet as a policy. I had a very sm...
Hello, i have one cube gateway which integrated with genesys system and want to know in that case how i can configure MOH on cube gateway and make sure MOH should take which already running on genesys sys Thanks in advance
