Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have two users with Unified Messaging. The are using ViewMail to stream encrypted messages from Unity Connection 10.5.2. If they both have a shared line appearance and that shared line has a mailbox, is it possible to have the messages from the s...
Hi All, I'm looking for taxation software for a telephony using CME. thanks in advance, Regards, MM
Things Done:Configured Call pickup Groups, softkey template, adding call pickup group under DN settings and apply config+reset phones. We have: 1. CUCM 9.1.2. 2. All Phones are in Internal partitions. 3. CSS are different for users/phones. Problem...
Hi Experts, I have issue on incoming SIP call but for this extension (9224) uptill now. Incoming call behaviour is that once call comes phone rings and disconnets immediately. Debugs are attached for working and non working call as below. debug ccsi...
Hi All, Good Day. Is there a way to identify all the users that currently activated the DND button on their IP Phone? Customer want to check if who are the users that enabled/activated their DND button on their system. I know that we can see all the...
Hi All, We just want to trace how CDR get the data under callingPartyNumber. Upon checking, if the call is coming from the Cisco IP Phone going to another IP Phone or outside call (PSTN), the callingPartyNumber will still be the Directory Number of ...
HiWe have CME connected with ISP via sip trunkWe are experiencing two issues1) with call forwarding 2) with the snrIt seems that the from in the sip header is the originating A number which is not be recognized by the ISP which is expecting any did...
Hi Team, I would like to have experts view on the issue I am facing. I have a VG224 configured as SCCP to call manager with no restricted access to dial. H323 gateways is SRST reference and when gateway is going in SRST, it cannot dial anything mor...
Does Cisco have an IP Deskphone with a cordless handset? just like this one
Hi everyone, I am looking at upgrading a client from CME to BE6000. They currently use the CME for inbound fax to email via on-ramp faxing built into the CME gateway. I am reading that with CUCM we need a 3rd party fax server to accomplish this. Doe...
I am a customer, end user, systems administrator of a Cisco UCM system fully redundant with everything but a fax solution. We purchased a MultiTech Fax Finder IP and it has basic SIP integration notes. The faxfinder is connected on the network, integ...
Hi all, Who has already implemented the Cisco 8821 with CME 11.0 or 10.5? Fast Track Mode for CME10.5. What about CME11.0? Thanks, Norbert
i have been ask to connect one more E1 to my VWIC on my voice gateway , i think this extra E1 is basically a redundant line incase the first one fails correct? in term of configuration changes i think i woud need to add another dial peer to direct ou...
Is there anyway to change the ringtone without the Cisco Unified Communications Manager? If so, how would I go about doing so? I am trying to add a ringtone called Batman.raw, and on top of that when I change the logo, it changes to a blank screen.
I have two phone one 9951 (Sip) and another 7945 ( SCCP) configured for shared line registered to CME. the problem when i call to the shared line on the sip line there is no video, i Hold/Resume it video comes out. so how can i solve this issue, i...
| User | Count |
|---|---|
| 15 | |
| 12 | |
| 7 | |
| 4 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
