Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All, I want to block all STD/ISD Calls after Office Hours. But, In some case, If a user comes to office in Non-Office Hours for any scheduled urgent call he should be able to make STD/ISD call from his desk phone. Is that possible in CUCM. Regard...
Hi All, Can we configure CUCM to automatically disconnect PSTN calls after 30 minutes of time. If Yes, Please guide me through the process for same. Regards, Aniket P. Raut
Hello, i have 7800 series IP phone with voice mail button constantly lighting, but there is no voice mail profile configured in DN. How to clear this alerting?
Hi All, We would like to inquire all the required/needed resources for Conference Now Feature. Below are the requirements and existing setup for the Conference Now: - 100 Participants (Combination of Internal and External Participan...
Hello, I'm having intermittent issues with hookswitch between CP-7841s and Jabra Pro 9470 headsets. If the headset is undocked and being worn when a call comes in, and you answer the call from the 7841 you do not get the call in the headset for upw...
Hello, I need to save an "Unassigned Associated Item" in Cisco Unified CM Administration page. I press Modify Button Items and pop-up window launches. I remove Add a new SD and move in the Line [2] - New DN I have created and move it to 2nd place und...
Phone is not registering >>Reset the device (7945) >>Stuck at Upgrading the firmware Need fixed to this or How can I upgrade the firmware only one phone
Hello At work me and my colleague both log in on our extension. Clients call another number. I asked the service desk to do a group pick up so that the number the clients call on tings on our extensions at the same time. Now we have the following pro...
Hello everyone!I have an issue on my customer's deployment CUCM cluster. The release version is 11.5.1.11900-26.Everything worked fine, but after i installed multiserver SAN sertificate this problem appeared.In trace logs of tftp service i see a mess...
We have IP conference station 7939 running with SCCP protocol and we need SIP for configuring with hosted exchange. Can you advice on the possibilities. Product serial number: 0004F2E0529F
Please help.. Regards Sanjay
Hi folks, Can I have 2 Opening Greetings in Cisco Unity Connection? If Yes, how can I? Even am trying to play custom recording but it goes to Operator and customized recording not played. Please suggest. regards, Ritesh Desai.
Hi All, How do I determine the IP address used for TFTPD64 when IP address for router is 192.168.0.12 as I attempted to upload files into CUCM but after restarting TFTPD64 no files were uploaded into CUCM. Using vmware to host cucm 7.0.1. Server runn...
hello guys, i need your help!! My boss ask to me to study the combination of nat, voip and routing, so i need to create a scenario as in attached topology. My big problem is to use THE SAME addresses in both the networks. i've to be able to give uni...
We have a team that has a hunt group set up for longest idle distribution between their 6 extensions. They have also requested that their individual extensions are all set to forward back to the hunt group so have set up forward all busy, no answer a...
