Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Team , Customer has CUCM in Singapore Can they use same cluster to register phones in INDIA?Is this allowed ? Gateway shall be separate in INDIA Please let me know if that feasible or NOT If Yes ,what all call cases are allowed and what NOT ?...
our campus has tons of phones unregistering and registering is there a way to view that in real time in CUCM? Cheers on 7970s model phones and CUCM 9 version cheers
I have a SPA9000 connected to 4) SPA504G Phones and 1) 7941-G phone loaded with the SIP firmware SIP41.8-5-4S. I am using the voicemail server provided by the VoIP provider (callcentric.com), not the SPA400 usually paired up with the SPA9000. I am al...
Hi all, Kindly help us regarding on the encountered issue of one way audio on outgoing calls. Internal calls and incoming calls are working.We just encountered the issue for outgoing calls. When user tried to call PSTN number/outgoing calls, user h...
We are connected to the ITSP via sip-ua registrar on our 2911. Inbound sound is very quiet. Internal sound is excellent. Is there any way to change the "gain" on a SIP trunk? Thanks
I have been getting this constantly my log is filled with these: 1190852: Jul 26 09:39:54.058: %VOICE_IEC-3-GW: Application Framework Core: Internal Error (Toll fraud call rejected): IEC=1.1.228.3.31.0 on callID 110641 GUID=A690F976527511E681C3C62105...
Hello, I have build vpn between two ASAs . One of them is at HQ and another one is at branch . I have build IPsec s2s vpn between them. And there is AVAYA ip telephony at HQ and I added IP of the call manager . I can ping call manager from remote ...
Hi, I'm getting calls from my service provider to receptionist phone and I can hear the call well. But when I transfer the received call to another user. I cannot hear the voice. Thanks
Hello everyone, Let me explain what do i have, and tell you what i need. I have : 1. I have a phone line with a reachable number, only one phone using RJ11 is working right now.2. I bought 3 cisco 7975G3. I bought 1 Catalyst 2960 And here is what i n...
Dear all,we have configured Linksys SPA3102 to communicate with CUCM 6.1 so there is no problem with receiving or making calls from deskphone via PSTN connected to FXO. Fax machine is connected to FXS interface of SPA3102. Is it a way to separate fax...
Hi guys, I have a weird problem with pstn mobile calls going to voicemail. We have a CUBE between Telco SBC and Cisco CallManager. When Extension-A calls PSTN mobile and forwarded to voicemail, there is a 4-5 seconds silence and then the call is gett...
Hi, There is a Hunt Group configured in my organisation. Now one of the user has requested when calls come to his phone extension via Hunt Pilot then it should forward to his mobile number. I checked "Use Forward Settings Of Line Group Member" option...
Hi there, configured an MOH in SRST in one branches office rotuer and not working, "show ephone moh" displays following error: File MoHv2012-6-12.wav (not cached) type INVALID Media_Payload_G711Ulaw64k.same file has been upload t...
Hello, I was recently asked IP Communicator v 8.6.5.0 is compatible with the W10 Tablet. Does anyone know of a compatibility matrix that would provide an answer to this type of question? I can confirm the W10 tablet is not our enterprise standard ho...
Hi this question was frequently discussed in the past, but there may be new sights onto it. CUCM FAQ states: Can I cluster my CUCM BE6K?? Yes, the first server MUST be a Cisco 6K server, all other servers can be UC on UCS TRC / specs-based, or 3rd ...
