Cucm version is 11.0.1.22900-14 BLF For Call Lists is enabled in Enterprise Parameters Configuration. Phones are rebooted. Native presence works in CIPC but not in 7940/7941 IP Phones. All phones are in standard presence group What can be wrong?
HiWe have CUCM 9.1.2 and IM&P 9.1.2installed Jabber on Windows and mobile devices.Jabber clients with manual setting is working fine.But Automatic Jabber for windows login gives "Password incorrect" error.We have made all the required SRV entries on ...
hi all do any one have idea , how to remove the Quotation from moh "flash0:/music-on-hold.au". actually I am practicing on router 2911 without voice card , and the router is working nice and I configured also the ip phones 7941, 7942, 6921 . but ...
Hello, I have requirement where I need to dial out more than 24 digits from CUCM, but it taking maximum 24 digit. Kindly suggest how to increase digit length. Rgds, Hoshiyar M- 9899245270
im migrating from an old digital voice gw model 2811 to 2921 , im trying to configure a E1 card from scratch but im having issue with the command parameters , like for example (card type e1 "slot" "subslot") or ( controller e1 slot/port) , how do i f...
I apologize in advance if this is answered somewhere already, but I could not find it. I am new to the reporting within Cisco Unified Intelligence Center (version 10.6) Is there a reason why the "Called Number Summary Activity" report would list a ...
Hi We have Cisco Call Manager 10.5.2 and we want to use Cisco TAPI feature. We have no problem with windows 7 and 8, but when we install and run this program on windows 10 all configurations disappear suddenly and it does not work. I have read some f...
Good Morning to All I recently update ip phones model 7942G and its work good, but I notice when I check the status of firmware versions, before it was SCCP42.9-1-1SR1S and the update one show *SCCP42.9-4-2SR2-2S* , I don't know why the * showing i...
I'm trying to export universal line templates and universal device templates from bat. I've found that even though there isn't a specific category for these the universal device templates are exported with a phones export, however I can't find where...
my vcs-expressway have a fan issue and it keeps shutting down , i want to make sure i take everthing from it before it reaches a point where it wont work again , i have taken the backup (i ahve version 8.6.1) , is there a way to take the certificates...
Dear NetPro gurus,One of my customers has configured a brand new CME on Cisco 3945, while all Cisco Phones are locally attached to the same LAN.The problem is that when one Cisco phone puts another "on-hold", all the caller hears is the "du du du" ra...
There is a slight chance I am crazy but one day 2 weeks ago I could have sworn all my BLF Presence indicators matched Jabber status. So people who were offline were gray, away orange, red presenting (I understand the orange and red could have been on...
Hi , in my work we have 2 site that need to be connected , so now we need to configure dial-peers pointing to private IP of CME ( router ) and need to be register as H.323 Gateway . i have the IP address of first site X.X.X.X/24 and range of extensio...
IM&P 9.1.1 wont upgrade to 11.5 It keeps on saying version mismatch on publisher please switch version. I have loaded the 2 x cop files mentioned in upgrade guide. What Am I missing?
Question is whether cuec 9.1 is compatible with cucm 11.5?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 01-16-2026 03:24 AM | ||
| 12-31-2025 01:52 PM | ||
| 12-10-2025 11:24 AM | ||
| 11-16-2025 10:18 PM | ||
| 10-15-2025 09:15 AM |
