Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
hey all please help me in this issue i just made this configuration on router 2921 for CME !voice register global mode cme source-address 192.168.20.2 port 5060 max-dn 100 max-pool 100 load 7821 sip78xx.10-3-1-12.loads load 8831 sip8831.9-3-3-5...
Is there any way i can get missed call alerts to Exchange from CUCM?
i have solarwinds server and application monitor , it is showing an "unregistered gateways" alert all of a sudden . the thing is i have two analog and digital gateways and they are all up and calls are going outside fine , what could unregistered gat...
Any body suggest me how to activate SRST license. bundle which come with 2901 ISR router.
How does EMCC work with SME? is it as if it wasn't there?
I have home Voip service with CallCentric. I also recently obtained a VIC-4FXS/DID=, and PVDM2-64 for my Cisco 3825 router that I use at home for testing and learning. Is there anyway I can get it to work with my CallCentric Voip service? T...
I've got two extensions registered with callcentric.com, and the attached CME configuration is working perfectly except for one thing: outbound calling works from all endpoints, but they all use the default extension (username 17772329287) for outbou...
Hello, There is a timer of how much a call is on hold at CME (Telephony Service/Voice Register Pool)? Regards Leonardo Santana
Dear All, I am facing an issue on LDAP user authentication. I have cucm 9.1.2. I have configure LDAP synchronization correctly with AD using an AD account with read privileges on the user ou. It works fine, I see active LDAP synchronized users in "...
Hi All, My question is, how to full audio test, Cisco IP phones? Example 7942. I am use the POE switch, but dont like use the system. Test without phone registering. Thank you all answer. Tony
Hello good day dears please support me i have 7821 ip phone and its SIP phone and its not working with SRST in branch location . and as ber Cisco Compatibility Information can support from SRST v 8.6 and i'm already upgrade my routers IOS to 15.0 to...
Dear Sir, We have two Sites .example site A and Site B.call manager Bussiness Edition 6000 is placed in site-A and Site-B phones are registered on this BE 6000 through VPN.In Site-B there is a SRST Router for the redundancy In site-B there is cisc...
Hello, I have a cisco 7931 IP phone connected/registered to a CME. CME has a SIP trunk to a third party voice provider and the negotiated codec on the SIP trunk is configured to be ILBC. The SIP trunk seems to be working fine with the ilbc codec, how...
Hi, I used call manager express 10.5. I want outgoing call to PSTN via FXO port but SIP 486 Busy Here. Config and debug attached. Incoming calls working not problem but outgoing call not working. Example call: 1214 local sip phone (9)0506132XXX...
I have a really strange issue. I have two subscribers that cannot call devices registered on each other. They can call devices registered on other subscribers, and other subscribers can call them. They just can't call each other. When attempting to c...
| User | Count |
|---|---|
| 7 | |
| 6 | |
| 5 | |
| 4 | |
| 1 |
.jpg "VIP Expert"){kind=icon}
