IP Telephony and Phones

Hello Team,nrtccorpvg1#sh running-config | se dial-peer voice 80010dial-peer voice 80010 pots description Outbound from TataPri call-block translation-profile incoming call_block destination-pattern 00008001093101 progress_ind alert enable 8 port 0/0...

i have CUCM 11.8 with GW 2911(4FXS and 8Fxo) i can make call from ip phone to fxs and fxo but can't make call from fxs and fxo to ip phone i need support show run attached

I have CUCM in the main office and H323 gateway in the remote office. Phones in branch office register to the main office and they are SIP phones. I am trying to configure SRST in the gateway and came across the following issues: - Users are used to ...

i now i am fool. I try to unlock settings and do 123456789*0#. After that the phone dont wont to start. I try use Tftpd32 and cmterm-7942_7962-sip.9-2-3 but phone only download "term42.default.loads" and so the circle. Hellp please to live up my phon...

I need to setup a fully working voip lab (including cucm, cuc, vg224, cube, etc), and I was wondering if it is possible to use some soft phones as opposed of physical phones.  I remember in a virtual class, I could run multiple instances of some piec...

We are setting up 3 new PRIs on a 2951 with Frontier.  We received 300 DIDs as part of the setup.  The PRIs are registered with CUCM, and they show up on the router.  However, when we try to make an incoming call with one of the new DIDs, the calling...

Hi all, Special requirement from customer, can i use forward-digits and prefix based on the order in the same dial-peer? Such as the following dial-peer. dial-peer voice 226 pots  translation-profile outgoing to900  destination-pattern 226T  port 0/...

Hi, We have cisco mcs7800 media convergence server Cisco Unified CM Administration System version: 6.1.4.1000-10 Product Version6.1.4.1000-10Platform Version3.0.0.0-7 I noticed  Total Units for Feature700 Cisco Unity Connection Administration Ve...

Hello, We have a courtroom that uses a 7937 conference phone and have it set to use 6 Max. Calls and 6 for Busy Trigger (max. values).  The conference phone has a shared line with 7962 model phones that are set to 20 Max. Calls and 20 Busy Trigger th...

I'm trying to set up VoIP capabilities through a VPN to a remote site and cannot get the phones to register.Possible relevant hardware info:The CUCM at the main site is version 7.1The main site firewalls are ASA5585-X's running IOS 8.4.4The remote si...

HelloI wish to give a user read only access to RTMT, and no other aspects of CUCM.  I created a new "Cisco Call Manager Serviceability" role and assigned read access for the listed resources.RTMT -> Alert ConfigRTMT -> Profile SavingReal Time Monitor...