Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Good afternoon, I'm looking for some advise about an upgrade we are carrying out. Currently one of our customers has Call manager version 7.1.2.21900-5, and they are getting upgraded to 10.5.2.10000-5. Now one of my colleagues has tried to transfer...
We need to push CDR files [ XL-Format ] to FTP server at 11 pm on daily basis , with CDR Analysis and Reporting tool it is possible. Please advice.
I have many remote sites that need firmware updates. None of the phones are band new. I would like to test the Peer Firmware Sharing function on 7945 phones at a specific remote location (1 subnet), but do not want to update all of the 7945 phones in...
Hi, I have a customer who has recently upgraded to CUCM ver 11.0.1 and has raised a query over the excessive time taken for users to logon to the Extension Mobility service - he says it takes about 45 seconds. I have removed all reliance on DNS, res...
hi, i have some problem on my CME router.i have 4 pstn line, with phone number ******12, ******13, ******15, ******16.when someone call to number ******12 the ip phone showing "Unknown Number" on the display, but when someone call another number the ...
Dear All : currently we are going to deploy CUCM 10.6 on virtual machine using ESXi , * The supported CPUs are as follows and should be 2.5+ GHz CPUspeed.** Intel Xeon E7-4800v3 or E7-8800v3** Intel Xeon E7-2800v2, E7-4800v2 or E7-8800v2** Intel Xe...
Hi there, Thanks for reading. I'm looking to determine the number of concurrent incoming phone calls that we've configured. I believe that's defined in the dial peers: max-conn 500 (in that dial peer:500). Is that everywhere I should check on that...
Cisco 2901 running IOS Version 15.6(1)T0a CME Version:11.0 When I go to the Cisco website to download the appropriate CME files, the last version I see available is version 10.5 (and this only includes the GUI files). I was able to extract the ringt...
Hi,I want to apply restrictions on the emergency calls that can be made from the DX 650 video phone. Currently we can make local, nwd and international calls through the emergency calls. Regards
Hi, I want to import phones in a CUCM 10.5 with an exported CSV-File. I put the header.txt and the phone.csv in a tar-File. Both files are definitely in tar-Archive. After uploading the tar-Ball to the CUCM, the header-file isn't any longer in the t...
We are using cisco call manager 8.5.1. We want to know how many software resources of conference bridge, annunciator and MTP are provided by a single call manager node?
Hello all, Can anyone please explain to me how to register an E.164 number which is assigned to a CUE AA with provider's SIP register server? All online documentation examples only show how to forward calls to AA coming from PSTN either over PRI tr...
Greetings, any good tips for free or money saving training courses for CIPT1 and CIPT2? Few teammates would like to take courses. Cheers,Matt
Hi, In CVOICE Foundation Learning Guide by Kevin Wallace, page 443, table 5-5 talks about the order of operation of voice translation profiles, both for inbound and outbound directions. It is mentioned that voice translation profiles applied globally...
Hi! We have faced an issue with the FXS port on our 2811 gateway with IOS ver Version 12.4(24)T2. There is an analog phone connected to the port with the default settings stated below. If I pickup the phone I cannot hear the dial tone, there is only...
