Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi there, Could someone please help me to identify intermittent call disconnect issue on CUBE router. Basically an external call disconnects before it hits to voice mail server (Cisco Unity). I have attached debug CCSIP all Call Flow - Incomming PSTN...
For a demo CUCM 11 we are installing on Cisco UCS C220M3 server. The ESXi is in subnet 10.10.10.0/24 The Voice subnet 10.10.11.0/24 The NTP server 10.10.12.0/24 From ESXi host we are able to reach all the above subnet default gateway but during CUCM...
Good day!! One question I have one cluster Unity version 11 and I need upload personal welcome audios !! What its the procedure ?? Thanks
Hi, I would like to enter caller input for a department list of up to 11. How is this possible if the caller input goes up to 9?
I have added the ATA 190 SIP device to CUCM ver 9.1.2 The default device firmware ATA190 1.2.1.004. I have not connected the analog phone to the ATA but the line 1 indicator light is on as if there is activity on the line. I did a factory reset, pow...
Hi all, The Cisco document mentioned the CME SIP Phone is not supported on above three parties conference using the DSP hw resource. Is it trust?
Dear All, My client servers are on running on CUCM 8.5.1 version. If I associate IP phone and enable EM, SNR & MVA with end user, does it make any difference in license? Thank you
HiWe have recently migrated our DDI range onto a SIP platform. when I make an inbound call it connects OK and receives the correct caller ID. When i try and transfer the call internally the caller ID on the called party is the called party... very st...
Hi, Is it possible to assign a phone button template with a "Record call" to a 7841 phone on CUCM 10.5 with phone firmware 10.3? We have MediaSense up and running with 79xx phones. A few users are upgrade to 7841 phones. We are having trouble finding...
Hello all, Can anybody tell me how to configure after hours incoming calls go to Voicemail? Best Regards
Hello all, I need to configure SIP 8831 SIP phone with CME 11.0 version, can any body provide configuration for this model.
Hello all, I know I disturb all of you in the last few days but really I am nothing without your help in my first voice implementation. I follow all your advices last days everthing is working fine .. MGCP Registered , PRI working , I can make out s...
Hi, I'm working on CUCM 10.5, this is a remote site which uses MGCP gateway that registered correctly. I' having an entyire site who's having the following problem: the IP phones are registered, once an IP phone does a reboot, its stucks on the CIS...
Hi everyone, I've went over the following two documents: http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/200199-CUCM-Certificate-Regeneration-Renewal-Pr.html http://www.cisco.com/c/en/us/su...
Hi Everyone, I encountered a fast busy tone when calling 21991 DN number which are associated on 5 IP Phone. After I recreate the said DN number, I was able to call it. I would like to know if it is a bug or what is the possible causes of this issue...
