Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello! In our product environment we use CDP and it works well with Cisco IP phones and LLDP with Avaya Phones to provide a voice vlan to it. LLDP turn on with global command: #lldp run Also CDP: #cdp run So, we also have many Dlink IP phones, it su...
I have IP phones connected to router in the branch office which use ADSL connection to internet and there is VPN setting to make between the Headquarters and the branch ,so that IP phone registered on the CUCM on HQ. sometimes the IP phone become in ...
Dear All, I would like to know whether phone conversation can be recorded? If yes, how do I do that? For your information I have a mediasense server in the network, let me know if this will help to record calls? Quick help would be helpful. Thank yo...
Hello, Is it posible to remove an ldap sync integration on cucm 7.1.5 and move to the local database without losing user information? There have never been local users only the Application users.I have read the documentation on integration with AD LD...
I have IP phone 7975 used for operator and I want this phone to have expansion module so I bought the expansion module 7916 . I powered the device and connect it to the phone 7975 . Now all ports are in orange colors and the screen show cisco logo. I...
Please does anybody have a link or document that shows the equivalent of secureCrt commands to putty commands.
Hi All, Please assist me with the below query in reference to SIP RFC standards: If a node receive Cancel with mimebody (ISUP: REL) (the INVITE received had no mime body), should node respond with 415 - unsupported media and a 200 ok sdp thereafter...
Hello, I have unified 2 comapnies and I have 2 Active Directo. So I configured a ADAM server and this server hasn't the samaccountname attribute. So I configured a script to pull the old samaccountname to uid attribute. This UID attribute is empty by...
My setup is as below CUCM------------------SIP/H323-----------Voice Gateway(2951)---------------------------E1/ITSP The E1 operation is whats in use. We now adding a SIP trunk from Telco. Have configured VG as h323 gateway which is working well wi...
Do you have someone configuration guide for 7821, not work in my CME Extensión Mobility it´s supported for SIP Phones 7821 ?
Running CME on 3825 router, with several SCCP VoIP phones up and running fine. Also has Unity Express VM, working fine. Now I'm trying to add a SIP phone. The phone has aquired an IP address from DHCP, and has TFTP server location and CM IP addres...
Hi guys, I did integration with tiger for cdr and extensions, CDR is OK but tiger couldn't be able to see my CUCM extensions! I did AXL services and configuration I already showed the extension in Attendant console with AXL so my AXL is working! wha...
Hi all, When I call an IP Phone from outside of my cell, and I finished the call from the IP Phone, my mobile remains in communication, i mean busy. what is the probleme here? so what is the configuration i should includ here? Thanks in advancce
Hello, VG224 is not supported with CUCM 11.X? http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#pgfId-1163273A At the matrix of compatibility does not show the recommended IOS Version. R...
I will migrate a cluster of two MCS Servers running CUCM 8.6.2 to CUCM BE6000 10X. I have some questions: 1 - What´s the better way to accomplish this? Using PCD or install version 8.6.2 at UCS and upgrade to 10X? Or i install the CUCM 10.x and uses ...
