Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Backstory - According to our carrier, we need SIP header diversions in our new CUBE router to allow for off-net call forwarding. Basically map an internal extension number to a valid carrier supplied NANP number (they test calling party for security...
dear all, I`m trying to do test sip voip call using sip protocol and i faced sip error, don`t know the cause if it is nat or other. Scenario is: ip phone(111)-->VoipGW_1(192.168.2.240)-->internet modem_1(192.168.2.254)--------->internet modem_2(192.1...
Dear all, I`m having the blow scenario Voice GW_1-->Internet-->Voice GW_2-->Sim Box (TELES.iGate) the sim Box contains sim card in which it first receive the voip call on port 20 from the Voice GW_2 and then transfer the call via its sim card through...
At our company we are doing SIP Trunking between the provider and CUCM. The trunk terminates on the call manager itself. We don't have any CUBE in our environment. Most of our remote locations have a regular router with no pvdm, fxo, or uck9 and c...
hello all, we have two cluster , each cluster should have 5 phone and cluster is seprated from each one. requirment is to ring each 5 phones at the same time in both he cluster when we call a toll free number in one locaiton. how to proceed with ...
HI everybody, I found a VG224 on my warehouse and I need to use it for a client, but I dont have the patch panel, nor the cable that joins VG224 to this patch panel. Can anybody tell me what are the references of those items? Thanks
Hi Guys, There is a new request from the client, where they need to change their normal working hours for a Particular Date in UCCX. To make more clear, Normal working time will be 8 AM to 8 PM. Now the user want to make change for a particular date...
Dear all we have configured IP sec vpn on cisco router for voice and video purpose, clients used laptops outside the network can register Soft phones through VPN. we are using CUCM with cisco voice router 2911.now we want to use phone 7945G on the re...
Hello,I have CUCM 9.1.2.11900-12 which is set to sync with Active Directory on Windows Server 2012 Standard.The sync is working ok but the department and manager attributes are not being populated in CUCM.The attributes are present in AD and unlike s...
Hello all, From BE6000 link, http://www.cisco.com/c/en/us/products/unified-communications/business-edition-6000/index.html BE6000H Model: Cisco Unified Communications on Cisco UCS C220 M4 Rack Server supports up to 1000 users, 2500 devices. What is d...
Not sure if this belongs in CCX or here as it's splint between a handler and a trigger. We've assigned a new TFN a DNIS from one of our blocks of numbers. The 4 digits for the 7 digit DNIS will be the last 4 of the number we've selected out of the bl...
I purchased cisco Business Edition 6000 10.0 as the following: BE6K-START-UWL25 BE 6000 - User License Starter Bundle with 25 UWL Licenses 1 BE6K-UWL-STD Cisco Business Edition 6000 - Workspace License Standard ...
Hi, I'm aware that conference call internally only works with G.711. Since we have two sites that uses different device pool in which the Region configured to used the is G.729 codec and the conference call is not working unless a transcoder is conf...
Hi 1. When the phone's ITL file has more than one TVS functions in the list, will it try all the TVS function listed ? or if not which one will selected and how will it be prioritized? 2. Does Extension mobility use Tomcat certificate(SSL) from the...
Hi, when my phone system goes SRST mode my operator's phone is getting registered with SRST router. But when im calling to internal extensions it shows my SIP line pilot number instead of Operator Extension. Thanks, Rajitha
