On a CUCM 9 we wanted to add additional Basic licenses. There were two separate orders and two bin files were generated.
After uploading the bin files, the basic licenses that were there since the initial installation disappeared as did also Essentia...
Hi,
I'm working on the CUCM 8.6.
I need to extract the 500 oldest IP phones in my CUCM, can you, guys, show me how to do that ?
Thanks in advance, guys.
Hello,
is there any a quick and free solution based to add in the CUCM corporate directory ( not the personal directory) entries for outside phone numbers PSTN ( people that are not CUCM users) .
Thanks
Dan
Gentlemen, can anyone help me configure the IP Phone CP7906G? I do not think anywhere on the Internet a tutorial that teaches clearly set, the account sip nor guidance on how to edit the information on the machine's directory. Who can help me thank y...
I am struggling to understand the following, (CUCM10.0.x. ) I have 2 phones, each in their own location and region, say A and B. using G729 and 384kbps Video as the settings between the two regions. When I make the call and check the available vi...
I am aware of how to unforward a phone via the web. However, I was looking into doing this by possibly dialing into the users mailbox and removing the forward feature remotely.
Hello,
In a multi-site environment is it current best practice to have 1 route group for Local and 1 for LD and then let distance from the phone determine what gateway to use? The system would send PSTN calls out the gateway closest to the phone (...
Which value should be used on a trunk link between all Cisco Lan switches:
mls qos trust cos
or
mls qos trust dscp.
If the answer is mls qos trust cos does applying this option apply this config to all ports in that asics group.
We have noticed that when we place 8861 phones behind a VPN router the phones can no longer download templates or changes. They work just fine otherwise. It does not appear to be a port blocking issue so we are wondering if it might be related to ...
I have a CUBE that is configured with a SIP trunk to Level 3 and a SIP trunk to a ShoreTel system. While debugging I can see caller ID name in the FROM header from the Level 3 trunk but the FROM header is missing from the INVITE to the ShoreTel syste...
Hello
I am looking for a bit of advice, we have a Centralized CUCM and CUC for Voicemail, with CUCME running in SRST mode at the individual sites. There is a requirement to split off some of the sites. I know the CUCME can run the phones and I know ...
