IP Telephony and Phones

Resolved! Prblem of add cisco phone 7911 in cucm 7

Hi All,kindly i really appreciate your support to add cisco 7911 in cucm 7,i used below steps but useless :Device -- > phone ---> add new --->cisco 7911--->sccp--->fill below ::1. MAC2. device pool3. phone button template.4.security profile.and then ...

3905 End-Point Maximum Reach Number error message

Dears,I am Hisham Fawzy, I have an issue about that 3905 End-point, it can't be able to transfer internally & externally and this message appear when pressing Transfer button " Maximum Reach Number". I believe that firmware issue but i need to confir...

Call History Presence Status for 7821

Hi All, will 7821 phone support phone presence feature in call history (Missed , received & placed calls ) ? . I have tested with firmware 10.1.1 SR1-4 and CUCM 10.5 . It didn't work.Thanks in Advance...

international calls restrictions on CME 10.5

Dears,i have a CME 10.5 with 4-FXO ports and SIP phones i want to restrict all international calls with a 'PIN' .. so only people knows that PIN will be able to dial Int-calls note: all calls routed thru the 4-FXO ports thanks

Call forward in extension mobility

HI Team,I want to use call forward from main line 9000 to 017.If 017 not pick the call, Call should forward to 010.But 017 is using extension mobility, if it logout then calling is not forwarding.How we can use call forward on CUCM ? Thanks

Cisco ATA 190

This has got to be one of the most frustrating Cisco products ever made. I simply want to configure this device with an online SIP provider and plug in my existing analog phones. I don't have a call manager or anything else so I am unable to upgrade...

Cisco 8841 support for 3rd party call control

Hi Cisco Team,What is required to get Cisco 8841 IP phone configured as a SIP phone for 3rd party call control?

Unable to answer calls and static during calls

This problem only occurs in one department at my organization. The department has 5 IP phones (7960). The first issue is that there is so much static during calls that they cannot hear the caller clearly. The second issue is that they cannot answer ...

CUCM admin training

We are deploying CUCM (forced to) in order to transition over our current Movi/Jabber users (no IM, no phone). We have no VoIP or any other Cisco solution except for Video, neither do we envisage one. Is there a video specific CUCM training? Or are w...

7962 phones stop working randomly

we have 2 call centers - geographically separated. Both running off same call manager 8.5 cluster and uccx 8.5 cluster. both use cisco 7962 phones, with extension mobility. plugged into cisco 2960 switches. pc's plug into the phones. issue is tha...

help on set up branch office with 2921 H323 gateway

I setup a new branch office with 2921 H323 gateway and cucm in HQ. When I call a number in remote office, I get dead silence and busy tone. However, user can hear ring at the remote location and able to answer the phone. I was able to talk to him....

Selecting a UCS for CUCM deployment

Hi,I need to deploy CUCM (5 nodes), Unity Connection (1 Pair) and Unified Presence server (1 Pair) in a virtualised environment. Approximately 5000 users and 10000 end devices. How do I select a UCS server type and model? Thank you,Fawaz

Configuring IAD2431 to talk SIP with Asterisk PBX

Hello,I am trying to use an IAD2431 as an ATA to connect 8 POTS phones to Asterisk PBX. (Through a NAT)I am at IOS 12.4 and I am trying to use the SIP protocol.Can anyone show me config files for the IAD and for Asterisk that would make this work?I t...

CUBE - Are different pay as you grow license types stackable?

Hi. I'd like to know if Redundant licences are stackable with single use licenses. Perhaps someone could kindly assist. Do I need to buy enough RED licenses for the total session count, thus wasting the bundled licenses that are supplied with the dev...

Selecting a UCS for CUCM deployment

Hi,I need to deploy CUCM (5 nodes), Unity Connection (1 Pair) and Unified Presence server (1 Pair) in a virtualised environment. Approximately 5000 users and 10000 end devices. How do I select a UCS server type and model? Thank you,Fawaz

IP Telephony and Phones

Forum Posts

Resolved! Prblem of add cisco phone 7911 in cucm 7

3905 End-Point Maximum Reach Number error message

Call History Presence Status for 7821

international calls restrictions on CME 10.5

Call forward in extension mobility

Cisco ATA 190

Cisco 8841 support for 3rd party call control

Unable to answer calls and static during calls

CUCM admin training

7962 phones stop working randomly

help on set up branch office with 2921 H323 gateway

Selecting a UCS for CUCM deployment

Configuring IAD2431 to talk SIP with Asterisk PBX

CUBE - Are different pay as you grow license types stackable?

Selecting a UCS for CUCM deployment

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM sends wrong device ID to Recording System

CDR reports: Request for activity on multiple lines

I get dozens of these alarms on WU, but no errros on controller

Transfer Caller ID and 8800 Line Buttons CME

UCCX upgrading Error encountered: The selected file is not valid.

Common Phone Profile 8841

Cisco MTP resets needed sometimes 2x per week? Is this necessary?

Cisco CP-8861 3PCC unable to dial using call history list.

CUBE - SIP trunk and Cause 65 Bearer capability not implemented

call forward not working with the uccx agent