Hi,I have a 10.5 presence server and jabber is on iphone. I am getting video call. But one way voice. Jabber version is 10.6and iphone os is 8.3I am getting both video and audio in Ipad.Please help to solve this issue Regards
Hi,I have a 10.5 presence server and jabber is on iphone. I am getting video call. But one way voice. Jabber version is 10.6and iphone os is 8.3I am getting both video and audio in Ipad.Please help to solve this issue Regards
Hello, We have a cucm 10.5 and the customer wants to integrate its customize call recording device, the issue is when we are making tests.the devices is not getting the info from the sip trunk and it's not seeing the phones that we added to the profi...
Dear friends,Some problems need your help, I'll try my best to describe it totally and briefly.Voice gateway : Cisco 2911 V/K9PRI :T1 PRI, pri-group timeslots 1-7 service mgcp.The ISP just provide us 7 channels from 1-7, ascending. All the configurat...
Hi ,Need to understand the readability between the CUCM and SRST.What is the recommended Delay/Latency, Bandwidh between Call manager and The SRST gateway setup.Regards,Velu S
Dear All,I am configuring cucm 8.6 on vmware. when the installation reaches to NTP screen.What NTP should i select for the successful installation of CUCM.Please guide me so that i can complete the installation.What will be the best solution for this...
Can any one explain the call flow/process which happen in CUCM when a IP phone try to communicate with local extension and to outside(external) 10 digit number (local/LD). Also how the call process for inbound calls (external). Like phone->CSS->Route...
Hi Guys, I'm new using Cisco and I'd like to know if there is any way to check or review which trunk and channel a 7960 phone is using in external calls. In Avaya we use the trunk ID Softkey but not sure if Cisco has a feature that we can use to pres...
Hello All,I am trying to figure out how I can make sure our Faxing router (*Cisco 2821) uses ONLY a g711 codec when calls are made to this device?Our system does support G.711, I know this because we are using g711ulaw for other areas of the phone sy...
Hi Guys, My Customer need to monitore any services about CUCM, as list below: Call SIP in and out :Call MGCP in and outCall H323 in and outCall SIP in generalCall MGCP in generalCall H323 generalMemory consumeoccupancy rate of interfaces E1 SIPoccupa...
Dear Team ,I want to add gateway in call manager . But "show ccm-manager " not showing the MGCP Domain Name ? Please see the configuration version 15.4service timestamps debug datetime msecservice timestamps log datetime msecno service password-enc...
Dears,I am trying to configure the MOH for HO internal users and it give me 3 beeps only, the audio file is perfect as it is tested with another cucm, also the Cisco default sampleaudio source works perfect within the HO,the codec used within HO is G...
Hi, Can any one help me on configuration for Cisco 2951We have (1) CP-7942G and (4) 7925G phone and (1) VIC2-2FXOHow can i configure my 2951 CME router.Thanks for your help in advance and need assistance. Regards
Hi,I have no idea how to integrate call phone(just i have CTI route point and call Manager) in asp.net application, this application should have the capability for calling customers by click on phone number ,and open a survey form , and receiving the...
Hi all, Is any one that can help me whit snip of code to find user ID that is logged in to a phone.I need SEPXXXXXXXXXXXX and userID o logout user from the device. Thanks. RegardsJan Meeling
I need to know if I can make support contract for Cisco Call manager ver 6.1.3.1000-16
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-16-2025 11:48 PM | ||
02-16-2025 10:15 PM | ||
02-14-2025 02:33 AM | ||
02-10-2025 04:39 AM | ||
02-07-2025 02:45 AM |
User | Count |
---|---|
4 | |
3 | |
2 | |
1 | |
1 |