IP Telephony and Phones

I attached a CKEM-C (keyboard expansion module) to an 8961.  On the phone, I get the message "Accessory Added"  "The phone is unable to power this accessory".  When I look under Applications -> Accessories, the only item in the list is the Headset Ad...

Hi Folks, Can you advise on the best practice to migrate from e CUE module to a new SM-SRE-710-K9 module? I need to save all the messages, scripts, accounts etc. Many Thanks Paul

Hello,We have a need to connect to an E1 span with several DSO's configured with no ABCD signaling. Our equipment complement is: Cisco 3945 iOS 15.03 with VWIC3-4MFT-T1/E1Multiflex Trunk Voice/WAN cardAdit 6000 Channel Bank configured with E1 control...

 Hi Cisco Support Community,I have a request from our sales team to configure a script that routes to different destinations based on the calling numberRegion. I will configure the script in UCCE to route to a different user using the Region option i...

I have a customer who is looking to build a couple of intercluster trunks between 8.5 CUCM clusters.  Originally I was looking at doing a non-gatekeeper h323 trunk, but the customer has stated that they will be moving to a Lync-CUCM integration in th...

Hello all, i have a cisco 2801 router where configured the CME. The problem i have is that internal site to site voice communications work fine but the external ones doesn't works at all (POTS: mobile and traditional).When i executed the command:# cs...

Hi all, I've just deployed CM10.5.2.10000-5 with 8945's on SCCP894x.9-4-2-8.All users are logged in with Extension Mobility. When a user is transferring a call they can not get to their speed dials. I have set abbr dial as a button on the softkey tem...

Hi,We are using IP phone (alcatel) and PaBX. On Router theres no Configuration of Ip phone.We have to site A & B Connected Via leased line.How can I verify the link or line where my VoIP packet runs.Also whos giving the Ip address for all my Ip phone...

Is there a way in CDR reports to get a report of incoming calls on SIP trunks?I was trying to do a gateway detail report which lists the calls onselected gateways, and has the number called, the calling number, etcbut under gateway types there is not...

I have a CCM version 4.1(3) environment. Two of our 7940G phones have developed the same issue. Upon boot-up, the phones display Universal Application Loader at the top of the screen with the following message, "Ethernet disconnected." The phones ...