IP Telephony and Phones

Hello,We have a two node cluster (one pub., one sub) running v10.5.2.  They are VMs (using medium OVA) running on similar Cisco Business Edition 600 hardware.  Small environment (100 devices) with all phones registered to the sub.When I go to install...

Hi All, I would like to run Auto-qos on two Cisco 3945 routers however we are seeing the option under the interface. We are however seeing the option under Cisco 2901 routers. Both router models have IP base and UC license activated. The 3945 even ha...

Hello all,We have a Cisco UC500 (Software pack 8.6.1)and seeing an issue with our CALLER ID# showing as "UNKNOWN" on ATT mobile phones.Our ISP advised us to change the  Screening Indicator    from User Provide, no Screen  to "user provided, verified ...

Hi Guys, My Customer is trying  to implement SIP Trunk connection and is having the following problem: Call B for A = workCall A for B = not work  SIP TrunkSite ARoute Pattern: 8000xxxx > RL Test1 > RG Test 1 > GW Test 1Translation Pattern8400.xxxx >...

hi  ,i have CCM version 4.2 software installed on HP server ,and about 500 ip phones series  cp-79xxHow migrate to bek6000m ?what is the license ? regards

how can I order additional CUWL standard License for existing CUCM 9.X ?

Dear,Does Cisco Collaboration provide multi tenancy, mean if we implement in cisco Partner's NOC to monitor different customer IPT. Along with this can we give each customer user veiw access for his own instance.  

HiWe are wondering if exist a workaround for BootUP Automatic MCS servers when we have a power failureIs possible to boot auto these servers?Regardscc

hello , i am working with a secure ip phone enviroment that use CTL files and im looking to implement VPN phones for teleworker users , what is the best practice secure configuration i need to implement it . i have asa 5512x firewall and i have the c...

Hello all!I've been trying to find a way to tie outbound calls from a particular IP phone to a particular FXO port, essentially creating a DiD situation for the IP phone on an analog CME system.   I know you can point the inbound calls that come into...

Hi,We trying to integrate Fenestrae Fax server with Cisco 2951 voice gateway. Call Sequence is like that. Fax Srv >>> sip>>>Cisco2951VGW>PRI interface> outside fax number> We did some config but unfortunately fax sending is disconnecting after couple...

Hello,My eyes are crossed from reading so many docs on QOS.  I have a Cisco 2811 running CME, 10x1 connection to the Internet, SIP trunks to Callcentric running g729r8 and g711ulaw.  Phones are 7960's running SCCP.  Runs well except when someone is d...