Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi EverybodyI am trying to register a cisco 9951 phone to a cucme. The phone was previosly connected and registered to a cucm 9.1, now it must be registered in the cucme. The problem is that the status messages of the phone show that the phone has 9....
Hello..I have a local network that consists of a Router, a Fire-Wall, a core switch (4507R) and Several (3750) switches which are connecting more than 100 end-point PCs.I need to implement local VoIP between devices (either software on PC -Preferred-...
At work we now have Cisco Jabber clients on notebooks. Internal connections are now possible, allthought with great latency because the central "master" resides a thousand kilometers thru europe away behind a VPN-connection. As a country subsidiary a...
Hi, I recently upgraded to 9.1.2.12901-3 and after, when I attempted to upgrade VMware Tools, the VMware Tools upgrade never ended and fails. Is there some documentation on this out there somewhere? Thanks, Joey
Dears,I'm About to upgrade our Mediasense server from 9.X to 10.XI need your help guys in this like the Refresh Upgrade COP file how can i get it also is it the same sequence as upgrading Normal CUCM Also Can i rollback if anything happened THanks gu...
HI, i am having major difficulties with the Cisco phone 7941g. i have been able to successfully update the phones to sip via tftp. i have a 3rd party sip provider and i would like to make this phone work with there service. but i can figure out how t...
IP phones frequently stops working when PoE connected to 6509 or 2960 cisco switches.Does any one have this problems ?I have lost dozens of phones.ThanksRosa
Anyone have any ideas on how to resolve the issue of extension mobility option being stuck on requesting when pressed on the phone?
Hi,if i dial from a SCCP Phone a external number i see the connected number. But if i dial with a SIP 9971 Phone i see first connected number but then the display shows only "0" . Also if the call is connected. I see "0".Is this something for CME SIP...
Hi All, We are turning up a LD PRI in a site ..but even after turning up the D channel it is not coming up. The switch type is primary ni2.Below is the current statusISDN Serial0/2/0:23 interface dsl 2, interface ISDN Switchtype = primary-ni ...
Good day, I have a question regarding the use of a POE switch.At this moment we have around 200 IP phones.All these phones use a power cube connected to the electricity.Our switches are not POE so I want to replace them by POE. My question is, is usi...
Hi I have cisco cucm ,There are cisco phones (7906) i just want to try with asterisk server . so i created two vlans , one for endpoints other for asterisk server . What is the best practice running cucm and other pbx in an enterprise network . Do i...
Hello all.I trying to configure CME on Cisco 2921 with IOS (C2900-UNIVERSALK9_NPE-M), Version 15.0(1)M5.And i cant ctreate ephone with phone type 6941, i have only follow list of phones (config-ephone)#type ? 12SP 12SP+ and 30VIP phones 7902 ...
Dear all, There is a one-way audio problem between 6961 and 6945 phones.All phones are in same network and subnet. All of them are in same device pool, region and using same MRGL.6961 is caller and call three different 6945 phone in sequence.On all c...
Hello, please i need your help urgently! when two users communicating , if a third person picks up the phone , she can hear the entire conversation of the other two.Bellow my configuration.Best regards
