IP Telephony and Phones

Adding Cisco 8831 phone CM version 8.5.1

Hello Experts -I need some assistance with the process of adding the needed device service pack to my CM cluster 8.5.1 in order to support 8831 conference phones.I need to upload a Public Space license as well as a device service pack. Which should ...

Cisco CME with WIC-2AM card

Dears, I have a cisco CME configured, I bought a Cisco WIC-2AM to have PSTN access. So please can you support me with a document or configuration step for the WIC-2AM. I need to do dial peers for the PSTN and connection plar the same as FXO card. App...

SRST Multicast MOH works for T1 but not for FXO

We have a remote site running 12-4-24.T configured for SRST Multicast MOH. It works well for our LD calls going over ds0-group 1, since I can do a show ccm-manager music-on-hold and see the packets incrementing. When a call comes in over the FXO lo...

Resolved! User-local with devices profiles issues in CUCM 10.5

Hi everyone, thanks for reading this post im working on a project that need to implement french language, so i download the User local , network and phone only files for french that are compatible with my cucm version, here is the scenarios:i configu...

How to allow incoming callers to make outbound toll calls.

We have UCCM 8.6. Management wants to allow some of our external users to call in using their cell phones, and then be able to get a dial tone and make outbound calls, so that when they call the customer, it comes from the company and not their cell...

Cisco CUCM and 3945 integration with MD 110 via DPNSS

want to connect with CISCO CUCM via E1 GW-VOICE vs a MD 110 but this only supports DPNSSFor this I need an intermediate device( VG or westell)? or only with configuration in the Cisco 3945?

Cisco 9971 vs 7975G

I currently have a UC520 with 3 x Cisco 7975G phones. I need a few more phones. From what I can see, the 7975G and 9971 are about the same price, however the 9971 is newer. Is there any reason to stick with the 7975G?Thanks

2821 Router with EVM-HD-6FXO

Hi all,I want to buy a 2821 router with an EVM-HD-6FXO module. The 2821 is running IOS "c2800nm-ipbase-mz.124-15.T10.bin". My question is can I use the 2821 as a Gateway for CUCM v10.5 or if I have change upgrade the IOS to a different version. Thank...

Which licenses do I need for CUE 8.6.7 AA/VM Only?

Before I place the order for the licenses I want to make sure which ones I need. Cue will be used as Auto Attendant and Voicemail I need 20 mailboxes. Which licenses do I need? Its version 8.6.7 NME-CUEIs this combination right? I'm not even sure...

Resolved! NO Ringback tone on SIP-TRUNK

Hi everyone recently i created a SIP-TRUNK connection to an VOIP service provider, the calls works just fine but the ring-back tone since you dial the number until someone answers were unable to hear it!!! Does any one know why??? Thanks for your co...

Hold Reversion Duration for a group of phones

Hi, I'm aware of the cluster wide parameter "hold reversion duration", I have a particular site we'll migrate that wants to mimic this feature, currently on their PBX, but I don't want to enable it cluster wide. Is there a way to do this for a sele...

Resolved! MLS QOS statistics

Hi.Need clarification about results of sh mls qos interface X/X statistics.#sh mls qos interface Gi1/0/8 statisticsGigabitEthernet1/0/8 (All statistics are in packets) dscp: incoming------------------------------- 0 - 4 : 650153 0...

Resolved! CDR for missed calls

Hi ,Is there any way to get report for missed calls in Cisco CDR or we need to go for some third party application? regds,aman

Resolved! Call Manager Device Profile - Change Product Type

Does anyone know if you can change the product type in the device profile once it has been created. Example: Profile was a 7960 now we want to migrate the profile to a 7962. Thanks

Can you route fax calls coming in to another system

Hi all We have an issue whereby we have some fax numbers that come in on one of our ISDN's but these devices are on another site.we have call manager on the main site where the numbers come in, then these fax numbers need to route to another telephon...

IP Telephony and Phones

Forum Posts

Adding Cisco 8831 phone CM version 8.5.1

Cisco CME with WIC-2AM card

SRST Multicast MOH works for T1 but not for FXO

Resolved! User-local with devices profiles issues in CUCM 10.5

How to allow incoming callers to make outbound toll calls.

Cisco CUCM and 3945 integration with MD 110 via DPNSS

Cisco 9971 vs 7975G

2821 Router with EVM-HD-6FXO

Which licenses do I need for CUE 8.6.7 AA/VM Only?

Resolved! NO Ringback tone on SIP-TRUNK

Hold Reversion Duration for a group of phones

Resolved! MLS QOS statistics

Resolved! CDR for missed calls

Resolved! Call Manager Device Profile - Change Product Type

Can you route fax calls coming in to another system

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

CUCM 11.5 Intercom on 6921

How to add personal greeting in cisco unity ?

Incoming calls show as forwarded

CUCM sends wrong device ID to Recording System

CDR reports: Request for activity on multiple lines

Cisco Jabber

IMAGICAL BILLY BLUS

CUCM CAP-RTP-001 and CAP-RTP-002

Issue with ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn inst

How to setup SAML SSO authentication in Expressway C