Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
IPV6 configuration for VOIP
Does fxs support digital phone? or fxs support Does fxs analog phone only?
Hello everyone;I have an issue with two ports on my cisco VG 3745, in fact the analog lines connected in these ports are instable, that means that the phone user usualy can't use their analog line ( busy tone when they try to call PSTN ).i notice tha...
Hello please, we want to integrate our Cisco CME with microsoft Lyn/Mediation Server. Please, what do i need to configure on the Cisco CME? Thanks
Hi I have set call pickup notification alert to come on after 6 seconds - what I notice is the notification stays on screen for a further 20 seconds afte rthe call has been picked up (users still think there is a call waiting so try and pickup - but ...
Can someone explain the differences between 7.x and 8.x ?
Hey, I'm trying to fix the time on my CUCM 9.1.2 cluster. The time is way off and NTP does not synchronize. I'm trying to set the time manually and then restart NTP to see if that helps. The operating system guide says I can do this if I delete the N...
Hi,I configured some SIP phones (CP-7821, CP-7841) with pickup function. Is it the Pickup / GPickup soft keys not function as the SIP phone? If yes, then I can use the FAC to access that? And I tried the FAC std. / custom as the pickup / gpickup .. ...
Hello, What System to recommend to use for our Small office on both Voice and Video Conferencing.and to our branch offices. Regards,Angelo
Hi,I've configured my CME with a sip connection from Skype but i can't seem to figure out why i can't make outgoing or incomming calles. Would sombody be able to tell me where i have gone wrong please.Thanksin advance. Usernames and passwords in th...
I am installing the CUE module in the router, to function of the auto attendant and voice mail boxes.Is it mandatory purchasing the follow licenses?FL-CUE-PORT-2= FL-CUE-IVR-2FL-CUE-MBX-5=What are differences between these licenses?Tks
Hi there,I'm tryng to set up MVA over the following:CUCM 8.5<--> SIP <--> CUBE <--> SIP <--> ITSPI've enabled MVA in Service parameters with number 5858 and for a test user, created Remote Destination and RD profile in CUCM and on the CUBE I haveappl...
I'm receiving alerts about high cpu utilization like this:"Processor load over 90 Percent.kipvmsMixer00 (50 percent) uses most of the CPU. Processor_Info: For processor instance 1: %CPU= 99, %User= 37, %System= 13, %Nice= 0, %Idle= 1, %IOWait= 5...
Hey Guys, These folks want to do a self pickup. Say your phone is ringing, and you are in the vicinity , press a code/your phone number in any phone around you and pick the call.Possible ? Thanks
I've got a client that is reporting to me that one of the 7941 phones no longer allows the user to do the transfer properly. She stated that the user can press the soft transfer key, then put in the number and the transfer takes place, unfortunately...
