Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, I have an IP telephony setup integrated with CUCM 9.x and Media Sense 9.x which is running on UCS with VM. How can I take the back up and restore for Cisco Media sense? Thanks in advance Nithin Louis.
I Search license for CP-7821 as in below tableLIC-CUCM-BASIC-AUnified Communications Manager Basic Single User-Under 1K120 UCSS-UUCMBAS-A-3-1UC Manager UCSS - 1 Basic User 3 Year Sub Tier A120 CON-ESW-BUSRA1ESSENTIAL SW Unified Comm Mgr Basic Sgl Us...
I need to add a user to administrate the CUC system but with restricted access. I`m looking to add them as a user without a mail box however the CUC is synch`ed with LDAP. Does above relies on the user needing to be in LDAP first or can I just add th...
We are running Cisco emergency responder 8.5 and have a Cisco WS-C3750-48PS-S Running c3750-ipbasek9-mz.122-55.SE6.bin. Emergency responder is seeing all but one phone plugged into Fa1/0/10. The phone is also not showing up in un-located phones eithe...
I have an issue, I'm getting a fast-busy when I call from 555-6002 to 555-5028. Where am I going wrong with this?Calls work from 555-6002 to 555-5000 Calls work from 555-5028 to 555-6002Calls Fail from 555-6002 to 555-5028ephone-dn 1 dual-line nu...
I noticed that if I assign an IP SUBNET to an ERL to pick up any phones that are not on a Cisco switch, many of the listed phones in that subnet show up under the IP subnet listing even though they are assigned to a different ERL.by the switch config...
Hi, I have a customer who is using snom ip phones. The are considering the cucm-be, however wishes to retain the snom phones. The snom website mentions compatibility with cucm-5 but not any current versions. Can someone throw in some light? http...
Greetings, After having a refresh upgrade from CUCM 7.1 to CUCM 10.5, we are having an issue on Extension Mobility, the service is working great but for example if a user dials a wrong number The announcement "YOUR CALL CANNOT BE COMPLETED AS DIALED"...
Hello, we're occasionally getting more slow to unresponsive web ccm admin pages. Restart of Tomcat service is currently our only solution. looking deeper into it, we found lot of admin users logged in doing mac activities all at the same time. and al...
Question. Is there a way to export specific UCM Data Dictionary tables from the UCM Publisher? Or am I forced to export the entire dB for analysis? If I am forced to get the entire dB...the DRS backup is my only means? From a CLI perspective, I cu...
Hello, Have a customer that wants to understand the alerting name behavior for two phone models. The call-flow is below. Call --> Hunt Pilot (alerting name XXX) --> If no one from the hunt list answers call is forwarded to --> Hunt Pilot (Alertin...
Hello,currently we are running CUCM 9.1.2 Unrestricted, it does not support SRTP, secure signalling etc. I would like to use LSCs issued by my own CA to authenticate our phones against RADIUS with EAP-TLS. As far as I understand how CAPF works, I ne...
Hi,I am running in to an issue: the CUCM node names a phone receives are not the FQDN, but only the host name. This ofcourse is the case because they are configured like that in System -> Servers. Most phones do get from DHCP the correct domain name,...
Cisco documentation indicates that on 79xx phones you can "Use the PC access port to connect a network device, such as a computer, to the phone". What types of problems might be encountered if that device is a Netgear Fast Ethernet Unmanaged FS105 f...
I am trying to configure a cisco 2911 like my 3800 series but noticed that the command voice service voip ip address trusted list ipv4 x.x.x.x is not there. How can I setup a trusted list to be able to make calls over the 2911?
| User | Count |
|---|---|
| 6 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
