Hi all,I have 3905 cisco IP phone and CUCM 8.5.1. I tried to download the cop.sgn file from cisco.com and tried to install the file, but it says no valid upgrade options were found. So not able to add firmware for 3905 phone. According to release not...
Hello i have this scenario,I have an remote site with an SRST Router and some IP Phones, registering in CUCM.All inbound call are redirect to an IVR in IPCC (DN Trigger in Route Point is 5800).How can i configure in SRST to redirect this calls (5800)...
How do you configure on a Cisco 8945 handset whether it displays the time at the top in 12 or 24 hour format?
Hi, i have a Cisco Unified Attendant Console Enterprise Edition 9.1, but it is incompatible with CUCM 10.5 that I am currently running.I see that Cisco Unified Attendant Console Advanced version 10.5 is compatible with CUCM 10.5. My Cisco Unified Att...
Hi ,We are building up IPT(Call Manager ,Unity,Presence) environment in standalone setup with IP address (172.16.1.X ...).we are using Cisco 3925 POE switch and 2911 Router.Now ,we need to connect our system to customer network(10.4.X.X) ,but the cus...
In which scenario i need to order below items,suggest me on this!LIC-CM-DLTop level part number for Unified CM Device LicensesLIC-3PTY-DL-10Unified CM Third-Party Device License - 10 unitsCM-PAKUnified Communications Manager PAK
I have a site that is far away in a small town that the carrier can not offer a PRI or T1 CAS. So, I have to stick with the 8 DID trunk and 8 COT trunks that currently go into a Nortel option 11 PBX. I want to convert the site to VoIP so I need to ...
Hello all I have added a new CSF device for a CUCILync user. I have associated the correct end user with the device and configured the correct tftp details for my subscriber Any ideas welcome Thanks Simon
Hello, Firmware image for 7925g is installed on the call manager server. But, it dosen't appear in 'firmware load information'.Wireless phone is 7925g with App Load ID: CP7925G-MFG-F.3.LOADSCall manager is running on version 4.2 Any help would be muc...
Hi,We are configuring the phones in Natted environment ,so we need to have natted CUCM IP address in the phone config file(SEP<mac -address of the phone >.cnf.xml).I have downloaded the files using following command(Tftp <TFTP IP.addr> get SEP<mac -...
Hi, Customer has a few users who need to be able to mask their DDI when dialling out. They need to present their Non-Geographic number 0844.. This number bears no similarity to their DDI. How can I change what number is presented on a User by User ba...
Clarify my queries on upgradingWhen upgrading call manager 7.0 to 10.0 should i need to order upgrading licenses(Note:We don have UCSS/ESW contract) ?In our existing call manager totaly 1300 DLU,in that 250 DLU are unused,remaining DLU Used with pho...
Hello, I have the following topology, (1)Publisher (2)subscribers in one site ,and (2)subscriber on a different site. Site 1: version 8.61 Publisher2 Subscriber Site 2: version 8.62 Subscriber The issue is that in the site (2) i see only 10 phones re...
We are installed IM presence& jabber version 10.5 (Primary & secondary),when users attempt to login in Windows/Jabber any client they are using primary presence IP address,my queries are instead of giving ipaddress in a client is it possible to give ...
In which scenario i need to order below items,suggest me on this!LIC-CM-DLTop level part number for Unified CM Device LicensesLIC-3PTY-DL-10Unified CM Third-Party Device License - 10 unitsCM-PAKUnified Communications Manager PAK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-17-2025 07:43 AM | ||
| 06-17-2025 06:11 AM | ||
| 06-09-2025 09:11 AM | ||
| 06-05-2025 02:29 PM | ||
| 05-29-2025 01:49 AM |
| User | Count |
|---|---|
| 4 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
