Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,i'm trying to configure how to preserve hunt groups using the SRST-E using SRST manger ( no UMG).Almost everything is working except hunt groups with parallel serving when one of the members in not connected.Does somebody know how to solve it? ...
Hi all, After getting done with the configuration, I got the following error, rebooting didn't help, either, any ideas?
Is there any show or debug commands that shows what route the call is taking when a call is being made?
As I read, switch in cisco phone, by default, for all traffic receiving from PC port, overwrite DSCP value to 0! How to put this port to trust state?
HelloI have a cisco 7936 conference phone that not register to cucm.It gets an IP address then keeps saying it can't contact the TFTP server.I've tried restarting the TFTP services on the call managers . Cucm Version :9.1 Software Version: 3.3(2.00)...
Dear All,Does Cisco has any Cisco IP Phone with Headphones. If it is there kindly let me know which model of IP Phones are with headphones.This is an urgent requirement. Quick Responses are highly appreciated.... Regards,Abdul Azeem / Systems Enginee...
Hi All,I have an issue in one of the fxs port in voice gateway, the fxs port connceted to the fax machine is stuck in off-hook state or FXS_PARK state.IOS Version : flash:c2800nm-ipvoicek9-mz.124-15.T14.binI have bounced the port and reloaded the ga...
Hi there,I have the following setup, Conference BR, Transcoder etc. on the H323 GW are all registered with Cluster A: The issue is when caller using 91122 calls 81122 and put them on holdSo caller 91122 puts 81122 on hold. 81122 hears the company Mo...
Hello: I need to configure toll fraude prevention in three of my routers, Ios versions:c880voice-universalk9-mz.124-24.T6.binc880voice-universalk9-mz.150-1.M8.binc880voice-universalk9-mz.150-1.M8.bin I used the following guide, which according to Cis...
I have a home lab setup and recently decided to add PSTN access via a SIP trunk and termination. I got the applicable information from the provider, set up the IOS configuration, but I'm not registering. I checked the CCSIP messages logs, no response...
hi,i have a question for using cac in a specific scenario:i have a HQ and a branch office BR with sip phone 8941, interconnected with WAN link.it's a 1Mb/s WAN link with qos 2xG711 communications reserved (160kb/s reseved, used dscp 46) for the two s...
I've been having an argument with a "federal employee" about VOIP issues, MAC address port security, etc. So here's the scenario:We use Cisco phones, with PC's plugged into their "trunk" ports, for network connectivity. Each switchport is configured ...
Equipment is AS5350XMCisco IOS Software, 5350 Software (C5350-IS-M), Version 15.1(4)M8, RELEASE SOFTWARE (fc2) I've got sip-ua registered.Here is config:sip-ua credentials username 0*******04 password 7 ******* realm custsip.********.com registrar ip...
Hello There,When attempting to “Modify Button Items” on a Device Profile, once you click the button and the pop up window comes up, the main page refreshes as a Cisco 9951 rather than the Device Profile it should be.I has been checked 9.x three diffe...
Can someone shed light on where in UCM the setting is so an ip phone (7965) can have "vpn" enabled on the phone? UCM Version is 8.6.2.22900-9.7965 Firmware version is SCCP42.9-3-1SR2-1S I did not setup our environment to work with VPN and have very ...
